Lancia Motor Club

Model Technical and Interest => Ypsilon, Musa and Y10 => Topic started by: fay66 on 22 June, 2010, 12:34:02 AM



Title: Ypsilon in Breakers
Post by: fay66 on 22 June, 2010, 12:34:02 AM
Anyone need parts for a Ypsilon? see http://www.motorhog.co.uk/parts/ and look under Lancia.
Interior trim looks nice.
Brian
8227 8)


Title: Re: Ypsilon in Breakers
Post by: HF_Dave on 19 July, 2010, 04:47:45 PM
I called the breakers about he Ypsion twice ! but they never got back to me. :P


Title: Re: Ypsilon in Breakers
Post by: fay66 on 19 July, 2010, 10:59:59 PM
I called the breakers about he Ypsion twice ! but they never got back to me. :P

That's ashame but sounds like atypical breaker!

Brian
8227 8)


Title: Re: Ypsilon in Breakers
Post by: HF_Dave on 27 July, 2010, 09:31:47 PM
Got all the parts I wanted, had to phone about 4 times. Complete interior, front bumper, passenger door, rear wiper motor (hope it works), being delivered by courier next monday. Total all parts 200 quid. only problem two pallets to Dublin 200. :o


Title: Re: Ypsilon in Breakers
Post by: fay66 on 27 July, 2010, 10:11:23 PM
Got all the parts I wanted, had to phone about 4 times. Complete interior, front bumper, passenger door, rear wiper motor (hope it works), being delivered by courier next monday. Total all parts 200 quid. only problem two pallets to Dublin 200. :o

Well done Dave, that should keep you going for a while, what did they want for the whole car?

Brian
8227 8)


Title: Re: Ypsilon in Breakers
Post by: HF_Dave on 28 July, 2010, 01:21:28 PM
Hi Brian, they woulde'nt sell the whole car, Being a write off blah ! blah ! blah ! I did try to get the whole car, it would have been cheaper to bring the whle car to Dublin. Anyway, the little Y has'nt stopped consuming money, a new set of front brake discs,  Anti roll bar bushes, and wishbones. The little Y felt un-stable at speed . I took off the discs and they were quite worn, the pads did'nt look square with the calliper kind of worn on one side. 20.00 per disc ,17.00 for pads and 50.00 a side for wishbones, sounds cheap to me for safety, I'm going t fit them this afternoon. ;)


Title: Re: Ypsilon in Breakers
Post by: fay66 on 28 July, 2010, 11:53:07 PM
Sounds good value to me!

Brian
8227 8)