Lancia Motor Club

Buy, Sell and Search => Spares required => Topic started by: rodney3010 on 27 May, 2010, 02:46:43 PM



Title: Fulvia coupe 1/4 light rubber
Post by: rodney3010 on 27 May, 2010, 02:46:43 PM
If you pull the 1/4 light frame out of a series 2 Fulvia coupe and then detach the actual glass from the frame there is a small piece of rubber which is attached to the glass - not be confused with the larger and thicker frame surround. When taken off it consists of a u shaped channel. Does anybody have a spare one? If not sure what I'm going on about please e-mail me (I'm currently incapiciatated with sciatica so any contact is welcome!)
Rodney


Title: Re: Fulvia coupe 1/4 light rubber
Post by: Dilambdaman on 01 June, 2010, 06:01:26 AM
Hi Rodney,

Paul Beck can supply lots of rubber mouldings one of which should addapt.

http://www.vintagecarparts.co.uk/en/list+rubber+and+sponge+parts~solid+extrusions/

Hope the sciatica is improving.

Robin.


Title: Re: Fulvia coupe 1/4 light rubber
Post by: rodney3010 on 01 June, 2010, 02:34:47 PM
Thanks Robin, I'll give this chap a go
Rodney