|
Title: Fulvia exhaust manifold Post by: Jai Sharma on 10 December, 2009, 09:23:37 PM Hi Guys- I always understood that 1.3 and 1.6 coupe exhaust manifolds were the same dimensionally, but the material only changed from mild steel to stainless. But can anyone confirm or correct me?
Thanks! Jai Title: Re: Fulvia exhaust manifold Post by: chugga boom on 10 December, 2009, 09:44:40 PM as far as i know thet are the same , all my 1600's had mild steel manifolds though, the new stainless exhausts i can buy through work fit 1.3 and 1.6 + the group A manifold i bought is also to fit both, hope this helps james
Title: Re: Fulvia exhaust manifold Post by: Jai Sharma on 10 December, 2009, 10:36:42 PM Thanks James. Is the coupe and saloon the same too?
Title: Re: Fulvia exhaust manifold Post by: fay66 on 11 December, 2009, 02:12:23 AM Thanks James. Is the coupe and saloon the same too? Jai,Depends if its series 1 or 2 Saloon, series 1 1091cc had a single pipe as standard, but my 2c is fitted with a 1300cc twin pipe, series 2 had the twin pipe. I assume the GT and the GTE Saloons had the twin as well. Brian 8227 8). |