Lancia Motor Club

Model Technical and Interest => Flaminia => Topic started by: chugga boom on 24 October, 2009, 08:04:28 PM



Title: help needed
Post by: chugga boom on 24 October, 2009, 08:04:28 PM
needed for project, everything between flywheel and gearbox, cover for rear of engine (over flywheel) prop and clutch and housing, 3c manifold either tripple carb type or single tripple carb type, 2.8 pistons would be usefull, dizzy cap and rotor arm, anything mechanical concidered that can connect the engine to the gearbox, any help appriciated


Title: Re: help needed
Post by: chugga boom on 21 November, 2009, 09:07:45 PM
big thanks to brian ......AGAIN!!! great to finally meet after all your help, good haul of parts today, still need coupling between prop and flywheel + flywheel cover, 2.8 pistons and 3c manifold, by the way brian WHERE'S MR NOVEMBER???  ???


Title: Re: help needed
Post by: DavidLaver on 21 November, 2009, 10:52:14 PM

So lets have the "before" picture and the history then...

David


Title: Re: help needed
Post by: chugga boom on 21 November, 2009, 11:13:21 PM
no can do i'm sorry, hasn't arrived yet and its all TOP SECRET  ;D, this ones being kept off the forum for the moment for reasons that will become apparent when i reviel it, hard to explain but you will understand when i plaster it on here  :o