Title: Master Cylinder on my 1969 Fulvia Zagato Post by: zagatoman on 26 February, 2009, 01:52:29 AM Hi all
Need some help again. Found a broken part in my Master Cylinder on my 1969 Fulvia Zagato. Need the part indicated on pic or a surplus old Master Cylinder that I can strip. Title: Re: Master Cylinder on my 1969 Fulvia Zagato Post by: Philm on 26 February, 2009, 01:49:01 PM I have several master cylinder assys but they are all for series 2 cars. Any use?
Title: Re: Master Cylinder on my 1969 Fulvia Zagato Post by: rogerelias on 26 February, 2009, 03:53:02 PM are the series 1 cylinders the same as Flavia?
Title: Re: Master Cylinder on my 1969 Fulvia Zagato Post by: zagatoman on 26 February, 2009, 04:05:01 PM Hi all
Thanks for the response. Not sure if the master cylinder is the same as a series two, all I know it looks like the pic and is not servo assisted. Kind regards, Paul Title: Re: Master Cylinder on my 1969 Fulvia Zagato Post by: Philm on 26 February, 2009, 07:42:31 PM Ok, the Series 2 is different. But in a previous life I did help co-build a succesful series 1 Zagato for the HSCC roadsports championships. We used a Nissan Sunny master cylider as Series one items were/are impossible to get rebuild kits for.
Title: Re: Master Cylinder on my 1969 Fulvia Zagato Post by: zagatoman on 27 February, 2009, 01:43:40 PM This is the bit I am looking for.
Like to keep everything original. The master cylinder is 18mm bore with no servo for a series one. The bit or a complete master cylinder would be great. Paul Title: Re: Master Cylinder on my 1969 Fulvia Zagato Post by: zagatoman on 21 March, 2009, 01:00:52 AM Found the bit.
Thanks all. Paul |