Lancia Motor Club

Model Technical and Interest => Dedra, Thema and Delta (2nd series) => Topic started by: Dilambdaman on 08 January, 2009, 10:44:07 PM



Title: Thema window winder.
Post by: Dilambdaman on 08 January, 2009, 10:44:07 PM
I need a front passenger side window winder mechanism for my 1993 Series 3 Thema 16v Turbo. The motor is OK but the cable as become detached from the lifter. Looks as though it may have been repaired in the past.

Anyone know if the S3 winder is different from the S2?

Robin.


Title: Re: Thema window winder.
Post by: St Volumex on 09 January, 2009, 05:56:35 AM
Dear Robin,

I need one too!  I believe the S2 & S3 winders are the same, it's the S1 which differs, at least that's what the ePer FIAT spares disk shows.  The TDC should have some.  Contact Lindsay or Mike Peddie.

Kindest regards,


Title: Re: Thema window winder.
Post by: m tulloch on 13 January, 2009, 01:14:34 PM

There is certainly a difference between my Series 2 & 3. The series 2 has a coiled spring type thing and the series 3 has a steel cable.
They are interchangeable though except that the electrical connection plugs are different.


Title: Re: Thema window winder.
Post by: St Volumex on 13 January, 2009, 03:01:22 PM
Hi Matthew,

Thanks for clearing that up.  Do you think the cable one is better?  The spiral wire type is very difficult to reassemble.   ::)

Robin, I see that David (Wheeler ?) is offering Thema parts for free under the THEMA 16v turbo thread.

Kindest regards,


Title: Re: Thema window winder.
Post by: m tulloch on 15 January, 2009, 03:15:43 PM

The cable one is certainly faster. The spiral ones are as slow as a week in the jail!!


Title: Re: Thema window winder.
Post by: St Volumex on 16 January, 2009, 06:33:56 AM
Anyone know what the S3 part numbers are?

I'd rather replace my slow spiral wire S2 ones with the cable ones while I'm at it.

The S3 part doesn't appear on my ePER which only goes up to S2.  ::)


Title: Re: Thema window winder.
Post by: fay66 on 16 January, 2009, 06:43:58 PM
Guy,

Series 3 window lifters
8247926 RH
8247927 LH

If you want to have a look at the previous supersed numbers that may also be of use if you can find one of them , use this link or are you still on dial up?
http://212.187.114.126:7080/navi?COUNTRY=099&SBMK=L&DRIVE=S&MAKE=L&COMM_MODEL=THE&ALL_FIG=0&LANGUAGE=3&PREVIOUS_KEY=HOME&ALL_LIST_PART=0&SB_CODE=-1&KEY=VERSION&PRINT_MODE=0&EPER_CAT=SP&GUI_LANG=3&WINDOW_ID=1
Brian
8227 8)


Title: Re: Thema window winder.
Post by: m tulloch on 18 January, 2009, 05:45:26 PM

You'd probably be better off trying Alfa 164 ones. I'd be astounded if they were different and there are loads of breakers for Alfas out there.


Title: Re: Thema window winder.
Post by: St Volumex on 19 January, 2009, 07:24:57 AM
Thanks Brian & Matthew for that info.

(Thankfully I'm now on wireless broadband.)

Unfortunately we don't have many Alfa 164s down here either, but it's worth a look.


Title: Re: Thema window winder.
Post by: St Volumex on 27 January, 2009, 07:43:15 AM
Guy,

Series 3 window lifters
8247926 RH
8247927 LH

Brian
8227 8)

Brian those nos. seem short of a digit?  ???


Title: Re: Thema window winder.
Post by: St Volumex on 27 January, 2009, 09:00:28 AM
Checked them quickly, they should be

82474926 & 7

 :)


Title: Re: Thema window winder.
Post by: Dilambdaman on 21 February, 2009, 03:04:31 PM
Never did manage to locate a replacement so, as the cable was still intact, ended up fixing it to the plastic lifter block with a couple of very small self tapping screws and a metal plate.

Robin.


Title: Re: Thema window winder.
Post by: St Volumex on 24 February, 2009, 10:17:10 AM
Robin,

Sometimes fixing what you've got is best - "better the devil you know..."  ::)

However I've managed to find a LH one, but I believe the RH ones are no longer available.  :(