|
Title: Data Sheet Post by: Brownbear 101 on 20 March, 2022, 04:01:00 PM Afternoon. I'm preparing a data sheet for my 1972 Fulvia 1600. Does anyone know the wheel torque, Cylinder Head Torque, and the valve clearance please?
Title: Re: Data Sheet Post by: lancialulu on 20 March, 2022, 04:48:35 PM what series?
Title: Re: Data Sheet Post by: Brownbear 101 on 20 March, 2022, 05:11:28 PM Afternoon It is a series 2 built in Q4 1971 and delivered in Q1 1972.
Title: Re: Data Sheet Post by: davidwheeler on 23 March, 2022, 09:58:41 PM Please post it in the technical information thread when you are done!
Title: Re: Data Sheet Post by: lancialulu on 24 March, 2022, 07:42:25 AM Valve clearance for 1600 0.2mm inlets, 0.3mm exhaust. Head bolt torque recommend throw wpaway Fiat stamped bolts and replace with either 10.9 bolts or 12.9 cap bolts and torque in stages (assuming new head gasket) to 24ftlb following the head bolt torque sequence. Wheel bolt torque I have never seen for mag alloy Cromodora wheels. I use 450mm extension and feel it tight.
Title: Re: Data Sheet Post by: Neil on 24 March, 2022, 09:53:49 AM This is club data sheet from 1982 you might find useful
Title: Re: Data Sheet Post by: Brownbear 101 on 25 March, 2022, 05:15:21 PM Many thanks everyone.
|