Lancia Motor Club

Model Technical and Interest => Fulvia => Topic started by: Wangler on 07 August, 2021, 02:00:58 PM



Title: 1975 Fulvia 3 (Coupe) Valve Clearances
Post by: Wangler on 07 August, 2021, 02:00:58 PM
Please can someone confirm that the valve clearances for a 1975 Fulvia 3 (Coupe) 1.3 are as follows:

Intake: 0.15mm
Exhaust: 0.25mm

I've done my best to get the info from the Repair Shop Manual, but as you probably know it's not the easiest to follow at times!


Title: Re: 1975 Fulvia 3 (Coupe) Valve Clearances
Post by: lancialulu on 07 August, 2021, 02:37:54 PM
Get your self a copy of the concise repair manual. This compliments the Fat workshop manual or the later Series 2 cars. Yes the values you have are correct assuming standard cams.


Title: Re: 1975 Fulvia 3 (Coupe) Valve Clearances
Post by: Wangler on 07 August, 2021, 03:09:55 PM
Thank you that's most helpful.

 The Repair Shop Manual looks as though it's been printed using an old John Bull printing outfit! I'm guessing the Concise manual is much smaller and better printed.