Lancia Motor Club

Model Technical and Interest => Fulvia => Topic started by: ChrisA on 18 July, 2021, 04:04:12 PM



Title: Front indicator rubber boot
Post by: ChrisA on 18 July, 2021, 04:04:12 PM
I finally have my Series 2 Coupe body back from the painters so have started pulling all the bits out of the boxes that have been secreted around the house for the last couple of years!

I have a question about the front indicators that I hope someone can answer. Should there be a rubber boot on the back of the indicator body to protect the electrical connection? I would assume that there should be, but nothing is listed in the parts manual or do any suppliers have one shown.

Can anyone help me with a couple if they exist.

Thanks
Chris

 



Title: Re: Front indicator rubber boot
Post by: eog on 19 July, 2021, 01:03:46 PM
Hi Chris
There is a small rubber cover that protects the wiring from the lamp.
Sorry best photo I could get.
Regards
Maurice


Title: Re: Front indicator rubber boot
Post by: ChrisA on 19 July, 2021, 06:20:38 PM
Thanks for picture. Now I know what to hunt out.

Chris