|
Title: Small Fulvia bits Post by: andyps on 15 December, 2020, 11:21:30 PM I'm after a few bits for a Fulvia - I need a couple of the rollers that should be in the seat runners and also the cap for the windscreen washer bottle (I presume it has a tube in it which I also don't have. The springs that are part of the window winder handle components would be great too
Anyone able to help? Title: Re: Small Fulvia bits Post by: peteracs on 16 December, 2020, 09:34:43 AM Hi Andy
Any idea if the rollers are the same as in the early Betas as I have a few spare? Do you have a photo of them and dimensions? Peter Title: Re: Small Fulvia bits Post by: andyps on 16 December, 2020, 09:54:40 PM Hi Peter,
I don't know about that. I'll try to get a measurement and let you know as it would be great to have some if yours fit - my drivers seat isn't firmly mounted because of the movement without the roller and I'm concerned it may not pass the MOT like it is. Title: Re: Small Fulvia bits Post by: Derek Creasy on 17 December, 2020, 09:20:35 AM There are 2 rollers in each seat runner and I think I have some buried somewhere. If no-one else comes up with any , I will go hunting for you ---how many are you short of ?
Title: Re: Small Fulvia bits Post by: andyps on 17 December, 2020, 03:00:35 PM Thanks Derek, I'm short of two, it is just one runner which doesn't have any.
Title: Re: Small Fulvia bits Post by: Derek Creasy on 19 December, 2020, 07:44:59 AM I will have a look.
Title: Re: Small Fulvia bits Post by: Derek Creasy on 08 January, 2021, 08:58:56 AM I have looked and looked but despite having re-furbished my seat rummers only last year with parts from my 2000 , I cannot find them anywhere. I have obviously done the same old trick of putting them somewhere safe . If I do come acress them I will let you know but in the meantime you could try Dave Gee or Neale Shepherd who are both much more organised than I :)
Title: Re: Small Fulvia bits Post by: peteracs on 08 January, 2021, 09:26:24 AM Hi Peter, I don't know about that. I'll try to get a measurement and let you know as it would be great to have some if yours fit - my drivers seat isn't firmly mounted because of the movement without the roller and I'm concerned it may not pass the MOT like it is. Hi Anyone have a photo/dimensions of these to confirm if they are the same as the Beta ones? Peter |