|
Title: 8.32 fuel pressure regulator Post by: m tulloch on 16 August, 2020, 06:04:31 PM Does anyone have any details on the fuel pressure regulator connections on a series 2 8.32, specifically whether there is a vacuum connection onto the plenum? The regulator on mine has a small rubber tube approx. 30mm long which I would have expected to connect to the plenum but it isn't connected to anything.
I have a workshop manual but unhelpfully it is for the series 1 which has a different set up for the plenum connections. Thanks. Title: Re: 8.32 fuel pressure regulator Post by: iom100 on 07 November, 2020, 04:55:38 PM I have a Ser 1 and the connections from the Fuel Pressure Sensor are as you describe - there is a short tube capped that goes nowhere.
FYI - Mine has become faulty, if the engine doesnt fire the first time the the regulator sticks and you have to wait an hour or tap it with a hammer !! and they are a fortune - but i am going to bite the bullet and get a new one. |