|
Title: Removing bodywork trim Post by: simonpen on 13 February, 2020, 06:01:07 PM I, or rather the car, has some rust behind the stainless trim which runs around the headlights and along the front of the car just above the bumper. I know that this is held on with clips but is it possible to remove it without ruining it? If so, how? Thankyou
Title: Re: Removing bodywork trim Post by: my69S1 on 13 February, 2020, 08:06:33 PM I removed all the trim on my S1 recently and there were no clips. It is a press fit. Check the underside of the trim at the ends (and maybe in the middle) and you may see a tiny screw. Remove these and then use a plastic (better) or wood wedge to push the trim off the lip. Start at the end. Pry a little and then move down a bit and pry again. You will see the trim start to pull away. Once the one end is free you can use your hand to pull and the wedge to help get the remainder off. Don't force it or you'll bend the trim.
|