|
Title: fulvia 1600 hf Post by: Roy Bod Bolderson on 28 February, 2019, 08:26:36 AM Hi just wondered if any one has a picture of were the oil temp sender goes on the engine also if any one has one for sale or were i can get one please .Also cylinder head touque settings for 1600 hf manual says 3.2kgm for standard bolts and 2.3 kgm for fiat bolts how can i tell the differance ? cheers Bod
Title: Re: fulvia 1600 hf Post by: lancialulu on 28 February, 2019, 08:35:42 AM If bolts have FIAT on them (most likely) it is the lower figure. Best to replace anyway with 110mm long 12.9 M8 Cap bolts ant reuse the thick washers and use the higher figure.
The temp sender position depends on what oil filter mounting you have as slightly different if you have the standard one to the one the couples an oil radiator. Anyway it si on the oil filter mounting at the back. |