|
Title: Fulvia parts Post by: ColinMarr on 23 October, 2018, 05:39:09 PM I have been slow to update my list of Fulvia parts, but here it is:
Fulvia parts – used and dry-stored Zagato Sport: Headlamp units. Glass good and undamaged, but reflectors are tarnished. Possible to restore? 3 units convex, 2 units concave. Sport S1 - Rear light complete units (2) and restorable. Sport S1 – Rear light cover glasses - good Sport S1 - Front indicator clear glass covers (new) Side indicator amber light unit (1) complete Front grille, stainless steel – 2 damaged units, repairable with skill! Instrument dash-panel padded vinyl cover – blemished but repairable. All Fulvia: S2 Brake master cylinders (2) stripped and clean – one perfect and one less so. Also, reservoirs and other internals. Speedo and other instruments S1 - Part instrument panel with piano key switches and lighting control switch S1 – Indicator/ flasher unit with chrome dome and stalk Oil temp gauge (1600HF) Interior door pulls – clear plastic, but as used on 1.6HF Gear lever rubber gaiter Wheel bolts S2 – set of 16. Re-chromed but less than perfect Box of old engine/ sub-frame mounting rubbers and fittings Hub-nut tools S2. Front and rear – 3 dog fitting Black plastic container for scissor-jack – tatty! Please contact me if you are interested in any of these items and I can send you photos and more information. I am keen to part with lots of stuff (I need the space!) and would consider job lots. Thanks, Colin PS I have just added two photos to show some of the parts. Also, my direct email address - colin.marr@blueyonder.co.uk Title: Re: Fulvia parts Post by: w_white on 29 May, 2019, 06:58:07 AM Hi Colin
I'm interested in the in the S1 indicator stalk and instruments. Are these still available? Title: Re: Fulvia parts Post by: ColinMarr on 29 May, 2019, 02:43:48 PM Thanks Gordon, I'll email you. Colin
Title: Re: Fulvia parts Post by: andyps on 23 June, 2019, 05:50:23 PM How much do you want for the hub nut tools? Just wondering if older ones might be better quality than the more recent ones I have bought.
Title: Re: Fulvia parts Post by: ColinMarr on 23 June, 2019, 09:38:56 PM Andy, thanks for the question, but it's an old advert and the hub tools went ages ago. Colin
Title: Re: Fulvia parts Post by: Colman on 03 July, 2019, 10:45:54 AM Hi Colin,
I would be interested in the two convex sport headlamps. I don't suppose that you would have any of the hairpin-type clips to hold them in? My car is currently fitted with Turkish LHD headlamps. I hope to refinish my miss-matched existing lamps and could do with spares. The 1600 oil temp gauge and wheel studs would also come in handy. Regards, Colmán SORRY! Just got caught out by the UnDead AD.. No need to respond. |