Lancia Motor Club

Buy, Sell and Search => Spares for sale => Topic started by: chriswgawne on 29 May, 2018, 12:47:26 PM



Title: New Fulvia 32mm rubber carburettor mountings
Post by: chriswgawne on 29 May, 2018, 12:47:26 PM
I have a few new unused OE 32mm rubber carb mountings for sale.As far as I can see these sell for around 150 + VAT + P&P per pair and they are not always available so how does 100 for a pair including delivery within the UK sound?
I will leave these on the LMC forum for a week and if not sold, ebay beckons which is also the case for the other Fulvia bits i have put on the forum in the last 2 days.
Chris 


Title: Re: New Fulvia 32mm rubber carburettor mountings
Post by: cannylancia on 03 July, 2018, 10:54:06 AM
Hi Chris trust you got my payment for the lock + key.

I'm sorting out the fuel system on my car and wonder which carb mountings you've got. The carbs on the HF are I understand mounted on a one piece adapter from inlet manifold to carbs all sealed with gaskets.

Regards

Alistair


Title: Re: New Fulvia 32mm rubber carburettor mountings
Post by: chriswgawne on 03 July, 2018, 04:56:15 PM
Hello Alistair,
Thanks for payment for lock and keys . My local ferramenta has run out of the correct key blanks and they are not due in till the end of next week so as arranged I will be sending you your lock and keys on August 10th.
Regarding carb mounts, if you have a 1600HF you will need 35mm rubber mounts, not 32mm?
32 mm is the standard size for 1298cc Fulvia engines and smaller I believe.
Chris


Title: Re: New Fulvia 32mm rubber carburettor mountings
Post by: fay66 on 03 July, 2018, 10:53:14 PM
Chris I maybe wrong, but if I remember correctly my Fulvia 1.3 Rallye Coupe had Solex 35 phh Carburettors and 35 mm rubber mountings to match.

Brian
8227 8) 8)


Title: Re: New Fulvia 32mm rubber carburettor mountings
Post by: lancialulu on 04 July, 2018, 07:14:19 AM
Just to be clear. 1600hf with 42 standard solexs requires a rubber mount to match i.e. 42mm openings tapering to inlet manifold diameter. These are available but at a price. You may be able to open up smaller rubber mounts to match 42's but very difficult....


Title: Re: New Fulvia 32mm rubber carburettor mountings
Post by: chriswgawne on 04 July, 2018, 09:03:18 AM
Sorry for any confusion. I realised I was wrong shortly after I wrote my previous posts but I couldn't remember what size carbs 1600 HF had. Our GTE which is 1298cc has Solex 35s and the GT which is 1231cc originally had Solex 32s although its now on Dellorto 35s with corresponding mounts and opened out inlet manifold.
So the new 32mm rubber mounts I have are for Fulvias with 1231cc or smaller engines.
Chris