Lancia Motor Club

Model Technical and Interest => Fulvia => Topic started by: Martin9 on 26 April, 2018, 09:50:44 AM



Title: Fulvia Sub-frame
Post by: Martin9 on 26 April, 2018, 09:50:44 AM
Can I draw your attention to my Spares Wanted appeal for a good sub-frame?
Simon in France has very helpfully found me one, which is great, but it is a very long way away.
Many thanks.
Martin


Title: Re: Fulvia Sub-frame
Post by: andyps on 26 April, 2018, 11:12:02 AM
Whereabouts in France is it? Maybe someone could help with transport - I'm in Brittany at the end of May for example.


Title: Re: Fulvia Sub-frame
Post by: DavidLaver on 26 April, 2018, 11:57:50 AM

He's close to Bezier, Narbonne.  Almost on the med just up from the boarder with spain.

He's got a holiday let advertised in the back of Viva - make a week of it :)


Title: Re: Fulvia Sub-frame
Post by: Martin9 on 26 April, 2018, 01:59:36 PM
Helpful suggestions - many thanks - but the sub-frame Simon knows about is materially south and east of where he is, so just under a 1000 miles from home.

But who knows, I might have to make a week of it.
Martin


Title: Re: Fulvia Sub-frame
Post by: simonandjuliet on 06 May, 2018, 06:11:28 AM
If you fancy going even further afield ......

https://www.kijiji.it/annunci/ricambi-auto/fermo-annunci-fermo/culla-motore-ricostruita-fulvia-lancia/123411705 (https://www.kijiji.it/annunci/ricambi-auto/fermo-annunci-fermo/culla-motore-ricostruita-fulvia-lancia/123411705)


Title: Re: Fulvia Sub-frame
Post by: Scott on 06 May, 2018, 03:58:38 PM
Search on ebay for item 153000027875 ... an apparently sound subframe is up for grabs.


Title: Re: Fulvia Sub-frame
Post by: chriswgawne on 06 May, 2018, 07:35:02 PM
Crikey. Is that really the going price for a good subframe?
Chris


Title: Re: Fulvia Sub-frame
Post by: Scott on 07 May, 2018, 10:05:10 AM
Crikey. Is that really the going price for a good subframe?

That's just what I thought Chris! At that price you could probably get one custom made and galvanised!


Title: Re: Fulvia Sub-frame
Post by: SJWhite on 08 May, 2018, 09:03:52 PM
Hi there
Am thinking of (at some point pennies permitting), getting the Fulvia sub-frame out and cleaned-up and Galvanised
I've a sneaking suspicion it will distort it - however really don't know
Any thoughts???
Ta
Simon



Title: Re: Fulvia Sub-frame
Post by: davidwheeler on 09 May, 2018, 03:03:21 PM
Don't know about galvanising (though I do not see why it should distort it, it is only dipping in molten zinc - 420C).   I had mine shot blasted and painted and then filled it with wax and it is still looking good.   The shot blasting did not do it any harm.


Title: Re: Fulvia Sub-frame
Post by: chriswgawne on 09 May, 2018, 04:37:10 PM
My experience with Fulvia subframes over the years is to be aware of the possibility of quite severe corrosion in the parts you cannot see whilst its in the car, never mind what you can see from underneath!
I can remember seeing quite severe corrosion in late Fulvia subframes (never mind the rear subframe mounts in the footwells)  back in the early 80's so they wouldn't have been much over 10 years old. They are a bit older now.
If you are going to keep the car then its definitely worth having a really good look at it, preferably with the body lifted off.
Chris


Title: Re: Fulvia Sub-frame
Post by: Parisien on 09 May, 2018, 06:16:59 PM
To side track, this issue applies to modern Italian cars too, my Maserati 4200 suffered from this failing, front and rear, cost a small fortune to correct, car was about 9yrs old!

P