|
Title: Appia Berlina engine tick over. Post by: Cassino on 01 June, 2019, 10:39:26 AM Having taken my Weber carb off and cleaned etc.replaced the condenser, HT leads, checked, cleaned the CB points , I aim to make a temporary hook up of a tacho as I need to tune the carb.
What would be a good tick over RPM for this 818 engine? Title: Re: Appia Berlina engine tick over. Post by: nistri on 03 June, 2019, 10:29:24 AM You may use a standard auto-multimeter (cheap) connected to the negative side of the distributor: it should show high and low revs, Revs around 800 rpm. Andrea.
Title: Re: Appia Berlina engine tick over. Post by: Cassino on 07 June, 2019, 10:31:11 AM Thanks for that ......I figured that 750-850 would be normal.........
|