Lancia Motor Club

Model Technical and Interest => Fulvia => Topic started by: HBG on 23 March, 2024, 05:42:17 PM



Title: You know what this is.
Post by: HBG on 23 March, 2024, 05:42:17 PM
So this was rattling against the clutch lever but appeared to be well bolted on. A bit of wiggling and it came off in my hand. With the bracket removed I need to decide what to do with it.

So, repair and refit or........

I use the car year round and have the flexy hose on the air intake, which is currently set to 'I'. The hose hasn't actually been on the end of the pipe now removed, for as long as I've owned the car but is in the exhaust direction.


Title: Re: You know what this is.
Post by: lancialulu on 23 March, 2024, 05:58:22 PM
I have never found the need for this even doing runs in damp spring air in 2000m alpine passes. But I guess it was a consideration given Turin's location in the original design as they must have had some carb icing during development.


Title: Re: You know what this is.
Post by: davidwheeler on 24 March, 2024, 10:57:12 PM
Supposed to cool the brake discs I guess.   A 2CV has a similar set up (also unnecessary).


Title: Re: You know what this is.
Post by: lancialulu on 25 March, 2024, 08:29:52 AM
Supposed to cool the brake discs I guess.   A 2CV has a similar set up (also unnecessary).
David it is an exhaust manifold hot air pick up to carbs and goes via a large hose (which gets in the way of the flywheel timing window) to the air filter box as a measure to prevent carb icing in deepest winter….


Title: Re: You know what this is.
Post by: Scott on 25 March, 2024, 10:24:41 AM
There was a chat on this subject back in Jan: https://www.lancia.myzen.co.uk/forum/index.php?topic=14019.0 (https://www.lancia.myzen.co.uk/forum/index.php?topic=14019.0)