Lancia Motor Club Forum Banner
24 June, 2018, 10:46:31 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Search Calendar Register  
Pages: [1]   Go Down
  Print  
Author Topic: Weber carb. float level  (Read 619 times)
0 Members and 1 Guest are viewing this topic.
GREENYORKIE
Member
****
Offline Offline

Posts: 68



« on: 21 November, 2017, 03:29:12 PM »

Hi, does anyone know the correct dimension to set up the float level on a Weber 34 DATR  as fitted to the 2000cc Beta. The Haynes manual has a useful picture but no dimension!
Thanks, David.
Logged

Evo1 1992, Delta HPE HF 1998, Beta coupe 2000,1983.Audi TT.
neil-yaj396
Committee
Rebel Poster
*****
Offline Offline

Posts: 875



« Reply #1 on: 23 November, 2017, 07:01:50 AM »

Time to join the Betaboyz Forum for a question like this I think? I'll try to dig out my carburettor manual and see if it says in there.

Float level isn't usually an issue in DATs though, and poor running is normally down to debris in the jets or failed rubber seals.
Logged

1979 1300 Beta Coupe, 2014 Ypsilon 1.2 S Series Momo
neil-yaj396
Committee
Rebel Poster
*****
Offline Offline

Posts: 875



« Reply #2 on: 26 November, 2017, 08:21:23 AM »

Dug out my Weber manual: It states -

Float Level

1. Hold the upper body in a vertical position, with the float tag gently touching the ball of the fully closed needle valve.
2. Measure the distance between the upper body (complete with gasket) and the top of the float.
3. Adjust as necessary by bending the inner float tag.

It doesn't seem to say what the above measurement should be, or where the level should sit unfortunately.

Hope this helps....
« Last Edit: 26 November, 2017, 08:23:02 AM by neil-yaj396 » Logged

1979 1300 Beta Coupe, 2014 Ypsilon 1.2 S Series Momo
GREENYORKIE
Member
****
Offline Offline

Posts: 68



« Reply #3 on: 01 December, 2017, 07:36:53 PM »

Thanks for that Neil. That's the info I have from the Haynes manual.I'll set it up so the float looks parallel,as in the picture,and see how it goes.
David.
Logged

Evo1 1992, Delta HPE HF 1998, Beta coupe 2000,1983.Audi TT.
Pages: [1]   Go Up
  Print  
 
Jump to:  

Contact the Forum Administrator

LMC Forum copyright © 2007 - 2015 Lancia Motor Club Ltd

Powered by SMF 1.1.20 | SMF © 2006-2011, Simple Machines