17 January, 2021, 05:32:01 AM
Welcome,
Guest
. Please
login
or
register
.
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
News
:
Need to contact the Forum Administrator? e-mail
forum.admin@lanciamc.co.uk
, for Database Administrator e-mail
database.admin@lanciamc.co.uk
- Copy deadline for Viva Lancia is 12th of each month. - For Events e-mail
events@lanciamc.co.uk
- To Join the club go to
http://www.lanciamc.co.uk/join.htm
Home
Help
Search
Calendar
Register
Lancia Motor Club
>
Model Technical and Interest
>
Fulvia
>
Fulvia oil canister - another time bomb defused
Pages: [
1
]
Go Down
« previous
next »
Print
Author
Topic: Fulvia oil canister - another time bomb defused (Read 1432 times)
0 Members and 1 Guest are viewing this topic.
stanley sweet
Lapsed
Permanent resident
Posts: 1149
Fulvia oil canister - another time bomb defused
«
on:
14 November, 2017, 12:28:23 PM »
In the July 2013 issue of VL Neale Shepherd wrote an article about 'the inbuilt self-destruct mechanism' in the Fulvia engine. This is the wire-wool filled oil filler canister. Although it was all a bit worrying I didn't get around to mine for a while but I'm glad I did as you will see. There are two ways of opening it. One is cutting around the centre of the filler, but not right through so cutting the centre pipe too. Afterwards you weld it up. As I have no knowledge of welding or welding equipment I chose option 2. This is peeling back the lip at the top and lifting the the top and cylinder out. So armed with a selection of wholly innappropriate tools I set to work. A thin edged but strong screwdriver got the lip starting to lift. All went well until it reached a point where it became very difficult to bend back and I seem to remember deciding it was time for a mince pie and The Polar Express (as you've now guessed I was working over the Christmas break). The next day instead of putting the tool under the lip and pushing outwards, I got a sturdier screwdriver and levered backwards using the lid as a fulcrum. I kept the plastic top in place so as not to damage the thread. Once past this difficult spot it became easy again and it was soon done. It was then that the full horror revealed itself. There was very little left of the wire wool as you can see. A few bits on the plates and a mass gradually pouring out the bottom. When I did oil changes there was always tiny particles on the magnet which I took to be normal wear but as I discovered later must have been tiny bits of the wire wool. I cleaned it out then had a look around in the garage to find what I had degreaser-wise. I found an old bottle of 'Marine Clean' from years ago. I can't recommend this enough. I put the oil filler in an old ice cream carton and filled it with hot water and Marine Clean. The next day the water was black. They say just to rinse it in cold water. I did, fully expecting the water to bead up on a still greasy surface. But no, it was totally clean and degreased. I gave the whole thing a coat of self etch primer and then a few coats from a Hammerite spray can. Neale Shepherd said it can either be refilled with stainless steel wool or nothing at all. I took the 'nothing at all' route, not wanting to risk even stainless wool escaping. The last couple of oil changes I've done revealed nothing on the magnet. It's also a nice feeling when refilling that I'm not washing more debris down as well. I would recommend anyone who hasn't done this job yet to do it. Including cleaning and painting it really is a few hours work over a couple of days.
OIl can open 1.jpg
(93.32 KB, 787x521 - viewed 536 times.)
Oil can open 2.jpg
(122.4 KB, 787x521 - viewed 569 times.)
Oil can cleaned.jpg
(126.29 KB, 787x521 - viewed 567 times.)
Oil can painted.jpg
(82.3 KB, 787x521 - viewed 556 times.)
Logged
1971 Fulvia 1.3S 'Leggera' 1999 Lancia Lybra 1.9JTD LX SW
DavidLaver
Permanent resident
Posts: 4181
Re: Fulvia oil canister - another time bomb defused
«
Reply #1 on:
14 November, 2017, 01:57:14 PM »
That would make a good article for Viva.
Logged
David Laver, Lewisham.
simonandjuliet
Permanent resident
Posts: 2270
Re: Fulvia oil canister - another time bomb defused
«
Reply #2 on:
14 November, 2017, 03:34:14 PM »
Good job , well done Stan !
I wrote an article that was published in VL about 15 years ago - Can't remember which issue, but I will look later.
Interestingly (to me anyway) I bought a second hand one in Italy before I collected the HF because I wanted to replace the canister before I drove it back and it was an original
without
the stuffing ...... so maybe they learnt !
Logged
S1 Aprilia Cabrio, S2 Aprilia, S2 camioncino, S2 furgoncino, , R4 Sinpar, R4 Rodeo, R60 Tractor,R60 S, Moto Guzzi Ercole, Disco 3, Mini ALL4 JCW, Moto Guzzi Cardellino 63,Fulvia Berlina GT, 2019 Royal Enfield Himalayan
cyborg7
Member
Posts: 32
Re: Fulvia oil canister - another time bomb defused
«
Reply #3 on:
18 November, 2017, 05:41:48 PM »
Ouch - scary. Now I'm worried after reading this especially as I'm struggling to locate one of these canisters on mine - do the early s.1 coupes 1216cc have one of these or am I missing something? Thanks
Logged
Chris
https://lancia1965.wordpress.com/
nistri
Megaposter
Posts: 341
Re: Fulvia oil canister - another time bomb defused
«
Reply #4 on:
20 November, 2017, 10:50:23 AM »
Early S1 Fulvias don't have them, Andrea
Logged
Andrea Nistri
Ardea S2
Appia S2
Fulvia GTE
Fulvia Sport 1.3 S
Fulvia Montecarlo
Fulvia Coupe 1.3 S
Pages: [
1
]
Go Up
Print
« previous
next »
Jump to:
Please select a destination:
-----------------------------
General
-----------------------------
=> About the LMC Forum
=> General Chat
=> Press/Media: Lancias mentioned, seen or wanted!
=> Competition Information
=> Events 2021
=> Local Events
=> LMC Legends
=> Links
-----------------------------
Model Technical and Interest
-----------------------------
=> Pre-Lambda
=> Lambda
=> DiLambda
=> Artena and Astura
=> Augusta
=> Aprilia, Ardennes and Ardea
=> Aurelia
=> Appia
=> Flaminia
=> Flavia
=> Fulvia
=> Stratos
=> Beta and Montecarlo
=> Gamma
=> Delta and Prisma
=> Dedra, Thema and Delta (2nd series)
=> Ypsilon, Musa and Y10
=> Kappa
=> Thesis
=> Delta (2008-)
=> Commercial Vehicles
=> Other Lancia Models
-----------------------------
Buy, Sell and Search
-----------------------------
=> Members' cars for sale
=> Lancia vehicles for sale
=> Lancia vehicles required
=> Spares for sale
=> Spares required
-----------------------------
Events Archive
-----------------------------
=> Events 2011
=> Events 2012
=> Events 2013
=> Events 2014
=> Events 2015
=> Events 2016
=> Events 2017
=> Events 2018
=> Events 2019
=> Events 2020
Loading...