Lancia Motor Club Forum Banner
12 December, 2017, 07:42:16 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Search Calendar Register  
Pages: [1]   Go Down
  Print  
Author Topic: Aurelia B20 Carburettor Rebuild  (Read 172 times)
0 Members and 1 Guest are viewing this topic.
DAYTONA
Member

Offline Offline

Posts: 1


« on: 08 October, 2017, 05:53:40 PM »

Does anyone have a recommendation for an individual/company who can fully re-build a Weber 40DCZ  carburettor. we have used an appropriate service kit but
there is wear in the spindles, which precludes its being properly set up.   Any help will be greatly appreciated.
DAYTONA
Logged
Richard Fridd
Permanent resident
**
Offline Offline

Posts: 2664



« Reply #1 on: 09 October, 2017, 07:52:46 AM »

I too would be interested in some carburettor advice, as my Flaminia has an idle jet problem. The idle jet seems to be blocked. Partial removal cures the problem. Choke disguises the problem. Removal of the jet reveals nothing, no debris in the tiny jet. Refitted the problem is gone. Icing? This happens with both cylinder banks. The poor combustion then leads to plug fouling. Advice welcome as ever.
Logged

Richard Nevison Fridd
Pages: [1]   Go Up
  Print  
 
Jump to:  

Contact the Forum Administrator

LMC Forum copyright © 2007 - 2015 Lancia Motor Club Ltd

Powered by SMF 1.1.20 | SMF © 2006-2011, Simple Machines