Lancia Motor Club Forum Banner
23 August, 2019, 09:13:22 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Search Calendar Register  
Pages: [1]   Go Down
  Print  
Author Topic: Fulvia Series 1 Dipstick  (Read 456 times)
0 Members and 1 Guest are viewing this topic.
whitefright
Member
*
Offline Offline

Posts: 5


« on: 21 June, 2017, 11:21:45 AM »

I would be very grateful if someone could tell me the measurement from the max mark to the base of the rubber stop. Mine appears to be a 'moveable feast' Thank you
Logged
cyborg7
Member
**
Offline Offline

Posts: 21


« Reply #1 on: 22 June, 2017, 09:23:38 PM »

359mm on mine. But bear in mind that mine's a 1.2L so no idea if for larger engines the level might be different - don't want to mislead you as pretty important to run the right level.

However my dipstick has been crimped on the side to retain the top of the metal cap (to stop it sliding any further up). I guess if you can see or locate this then that could be a more definitive guide to the position for the top of the metal cap.
Logged
whitefright
Member
*
Offline Offline

Posts: 5


« Reply #2 on: 26 June, 2017, 06:17:36 PM »

Thank you so much for your reply, you have been a great help.  I have now found the crimp you mentioned.
Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  

Contact the Forum Administrator

LMC Forum copyright © 2007 - 2018 Lancia Motor Club Ltd

Powered by SMF 1.1.20 | SMF © 2006-2011, Simple Machines