Lancia Motor Club Forum Banner
05 November, 2024, 07:51:13 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Need to contact the Forum Administrator? e-mail forum.admin@lanciamc.co.uk     -      Copy deadline for Viva Lancia is 12th of each month.      -      For Events e-mail events@lanciamc.co.uk      -      To Join the club go to http://www.lanciamc.co.uk/join.htm
 
   Home   Help Search Calendar Register  
Pages: 1 [2]   Go Down
  Print  
Author Topic: Rear suspension, subframe and engine removal  (Read 14852 times)
0 Members and 1 Guest are viewing this topic.
frankxhv773t
Permanent resident
**
Posts: 2236



« Reply #15 on: 09 May, 2017, 08:08:19 PM »

I have a feeling the old Autocar road tests included a ride height figure on the dimensions diagram. Might this be a source of information?
Logged
nistri
Megaposter
*
Posts: 560


« Reply #16 on: 10 May, 2017, 05:50:57 AM »

A simple, rough, yet very empirical way of telling if the ride height is OK, is to see if one can place his hand vertically between the top of the tyre (correct size: 165/80/14) and the highest point of the rim of the wheel arch. Many Fulvias are riding too low. Andrea
Logged

Andrea Nistri

Ardea S2
Appia S2
Fulvia GTE
Fulvia Sport 1.3 S
Fulvia Montecarlo
Fulvia Coupe 1.3 S
lancialulu
Press Officer
Permanent resident
*****
Posts: 5032



« Reply #17 on: 10 May, 2017, 07:18:05 AM »

I have a feeling the old Autocar road tests included a ride height figure on the dimensions diagram. Might this be a source of information?

The gold portfolio MOTOR test pg 85 has some test data giving ground clearance under front suspension 5.5" and some height datum points for a S1 coupe (14x145 tyres):

Top front bumper 15.75"
underside front bumper 11.5"
Top rear bumper 17.5"
Bottom rear bumper 15"
Bottom of door to ground 11.75"

I think the underside of the front bumper might be under the number plate.....

This is fine but my cars do not have bumpers..... etc etc
Logged

Its not the winning but taking part! or is it taking apart?
Lancias:
1955 Aurelia B12
1967 Fulvia 1.3HFR
1972 Fulvia 1600HF
1972 Fulvia Sport 1600
1983 HPE VX
1988 Delta 1.6GTie
1998 Zeta 21.  12v
nthomas1
Rebel Poster
*
Posts: 855



« Reply #18 on: 10 May, 2017, 07:28:23 AM »

Thanks for all the tips on ride height.  I'll do some further checking when I get back to the UK, and will be sure to remove the bodies from the boot first!
Logged

Norm Thomas
Ormskirk, Lancashire

Own:
1973 Fulvia S2 Coupe
Previous Lancias: S2 Coupe and S3 Coupe in late 1970s
nthomas1
Rebel Poster
*
Posts: 855



« Reply #19 on: 05 July, 2017, 07:04:03 PM »

Thanks to all who have commented.  After much thought I've decided to go ahead with the removal of the rolling subframe. It's way beyond anything I've ever done before!  So far I've disconnected the cooling system, all electrics, and the choke and clutch linkages.  In the next few days I'll have a go at disconnecting the fuel feed (looks straightforward), and then the brake lines (if I can work out which to disconnect) and the heater pipes (ditto).  From searching the web and various forums I've found half a dozen different designs of supports for the front end of the car and I'm opting to make one out of strong timber - supporting the car by the top subframe extension mounts, braced across the wheel arch openings, and supported on 100 or 125mm castors.  I have a couple of nephews who will help me with the lifting.  I have also been getting back to bare metal on the rear of the front panel and valance.  Getting the subframe/engine out will enable much better access to complete this task.   Onward and upward. 


* IMG_7284 copy.JPG (1236.28 KB, 2126x1594 - viewed 476 times.)

* IMG_7159 copy.JPG (1095.54 KB, 2126x1376 - viewed 493 times.)
Logged

Norm Thomas
Ormskirk, Lancashire

Own:
1973 Fulvia S2 Coupe
Previous Lancias: S2 Coupe and S3 Coupe in late 1970s
Neil
Permanent resident
**
Posts: 1314



« Reply #20 on: 05 July, 2017, 09:59:43 PM »

Norm, don't forget the steering connection, one bolt on the split joint, use cable ties to hold the rubber boot together to make it easier.  You should be able to unbolt the front callipers from the hubs tie them up and then you can leave the hydraulic hoses untouched.
Logged

Neil   
386

1973 Fulvia S2 1.3
the.cern
Permanent resident
**
Posts: 1494


« Reply #21 on: 06 July, 2017, 02:54:53 AM »

Sounds like fun ..... !!!
Just a comment on the castors ...... I have, over the years come to the conclusion that any castors for a job like this should have steel wheels and brakes!!
Good luck,
                Andy
Logged
SanRemo78
Rebel Poster
*
Posts: 836



« Reply #22 on: 06 July, 2017, 07:19:06 AM »

Depends on the floor surface, nylon wheels are a good compromise but a locking faclilty is essential!
Logged
simonandjuliet
Permanent resident
**
Posts: 2548



« Reply #23 on: 06 July, 2017, 08:31:11 AM »

Do you want the dimensions and plans for the box section repair panels, if you do I can dig them out and post pictures?
Logged

AmilcarCGS, ApriliaCabrio,S2Aprilia, 2xArdea c'cino,S4 Ardea, Appia c'cino, Appia f'cino,B20s4,R4 Sinpar, R4 Rodeo, 65 Moke, 3xR60 Tractor, 2xToselli 78, Moto Guzzi Ercole,LR Defender, Mini ALL4 JCW, Moto Guzzi Cardellino, Fulvia GT, RE Himalayan
nthomas1
Rebel Poster
*
Posts: 855



« Reply #24 on: 06 July, 2017, 10:04:38 AM »

Do you want the dimensions and plans for the box section repair panels, if you do I can dig them out and post pictures?

Thanks Simon - I've already bought a pair of mounting boxes.
Logged

Norm Thomas
Ormskirk, Lancashire

Own:
1973 Fulvia S2 Coupe
Previous Lancias: S2 Coupe and S3 Coupe in late 1970s
nthomas1
Rebel Poster
*
Posts: 855



« Reply #25 on: 06 July, 2017, 12:58:07 PM »

Norm, don't forget the steering connection, one bolt on the split joint, use cable ties to hold the rubber boot together to make it easier.  You should be able to unbolt the front callipers from the hubs tie them up and then you can leave the hydraulic hoses untouched.

I hadn't thought of that option with the callipers Neil.   Then I'd only have to disconnect the thick hose running from the Servo.  Can't find that in TAV at first look though!
Logged

Norm Thomas
Ormskirk, Lancashire

Own:
1973 Fulvia S2 Coupe
Previous Lancias: S2 Coupe and S3 Coupe in late 1970s
nthomas1
Rebel Poster
*
Posts: 855



« Reply #26 on: 06 July, 2017, 01:01:52 PM »

Heater pipes removed this morning. I have to say I'm enjoying this process of disconnecting things before removing the subframe/engine. It's a great way for a beginner like me to better understand how the Fulvia works. Poring over the TAV parts diagrams and physically handling each component is educational and quite satisfying! I can also see how much more quickly the jobs could be done a second time round, thanks to increased knowledge, plus no need to take the multitude of photographs, and probably less time labelling cables.  I'm sure I'm preaching to the converted.


* IMG_7375 copy.JPG (1941.9 KB, 2448x3264 - viewed 450 times.)
Logged

Norm Thomas
Ormskirk, Lancashire

Own:
1973 Fulvia S2 Coupe
Previous Lancias: S2 Coupe and S3 Coupe in late 1970s
davidwheeler
Permanent resident
**
Posts: 1479



« Reply #27 on: 06 July, 2017, 07:04:55 PM »

Actually to extract the engine/subframe from my S2 Sport, I made a lenght of 2"x4" or thereabouts to fit across the front of the engine compartment with pads about 6"x3" to fit under the wings, tied it to the front to stop it shifting and then lifted the car off the subframe with a block and tackle.   Much easier than trying to jack it up!
Logged

David Wheeler.  Lambdas, Aprilia, Fulvia Sport.(formerly Appia and Thema as well).
JollyClubUK
Lapsed
Megaposter
*
Posts: 237


1971 Fulvia S2 1.3s fast road spec


« Reply #28 on: 06 January, 2023, 07:30:45 PM »

That brochure shot is strange. I've never seen a Fulvia sitting that level unless it's been lowered slightly for track use. Most Fulvias have a nose down attitude. Here's a photo of mine. The suspension has never been touched since I've had it and as you can see it sits higher at the back. It's exaggerated slightly by having lower profile tyres so it wouldn't be any good me giving you any measurements.
I think now I have changed the tyre size 175/65/14 I have the correct stance for Stan’s old Fulvia.


* 9FBAC98A-01EB-42B6-A09C-E9B4E09F7B49.jpeg (506.27 KB, 2048x1536 - viewed 150 times.)

* 08AAEA7B-8811-423A-8A1D-6D1473BE6442.jpeg (510.57 KB, 2048x1536 - viewed 141 times.)
Logged
Pages: 1 [2]   Go Up
  Print  
 
Jump to:  

Contact the Forum Administrator

LMC Forum copyright © 2007 - 2021 Lancia Motor Club Ltd

Powered by SMF 1.1.20 | SMF © 2006-2011, Simple Machines
Page created in 0.096 seconds with 21 queries.