Lancia Motor Club Forum Banner
19 March, 2024, 02:28:03 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Need to contact the Forum Administrator? e-mail forum.admin@lanciamc.co.uk, for Database Administrator e-mail database.admin@lanciamc.co.uk      -      Copy deadline for Viva Lancia is 12th of each month.      -      For Events e-mail events@lanciamc.co.uk      -      To Join the club go to http://www.lanciamc.co.uk/join.htm
 
   Home   Help Search Calendar Register  
Pages: [1]   Go Down
  Print  
Author Topic: Ribbon speedo  (Read 2512 times)
0 Members and 1 Guest are viewing this topic.
lancialulu
Press Officer
Permanent resident
*****
Posts: 4895



« on: 05 May, 2017, 04:28:24 PM »

I have opened my speedo up as it was under reading badly and the trip meter was not working (drive was seized - now repaired).

I noted the red ribbon round its drum was sticky on the underside, and the plastic drum was also sticky (from the ribbon). I cleaned the drum, and tried to clean the back of the ribbon with toluene but it remained sticky....

I wondered when Veglia (back in the day) made these ribbon speedos whether they invented a permanently sticky (akin to post-it note stickyness - not yet invented!!) ribbon to act as some sort of damping.

Can anyone tell me if they have done an autopsy on their Flavia speedo?Huh?
Logged

Its not the winning but taking part! or is it taking apart?
Lancias:
1955 Aurelia B12
1967 Fulvia 1.3HFR
1972 Fulvia 1600HF
1972 Fulvia Sport 1600
1983 HPE VX
1988 Delta 1.6GTie
1998 Zeta 21.  12v
lancialulu
Press Officer
Permanent resident
*****
Posts: 4895



« Reply #1 on: 06 May, 2017, 10:10:26 AM »

Update.

After putting it back together and bench testing I was not happy with the continuing stickiness of the red part of the ribbon on its drum. It caused the speedo to delay reading and under read.

So apart again. Not for the faint-hearted. Take plenty of photos (I did not before the mechanism of string and wheels came undone by accident!!).

I tried toluene (panel wipe) again but the stickiness remained. I tried Iso-propol alcohol and that did the trick albeit some (little) of the red came off. When dry the ribbon was no longer sticky.

Then working out how to re-assemble..... which was achieved (sorry no photos).

Bench tested and now have a smooth speedo .

The trip meter had seized on its driving gear which has snapped the minute alloy drive shaft from the odometer. I sleeved the original drive shaft and reconnected the two having freed off the trip driving gear (WD40 and 3in1 oil). Now works a treat.
Logged

Its not the winning but taking part! or is it taking apart?
Lancias:
1955 Aurelia B12
1967 Fulvia 1.3HFR
1972 Fulvia 1600HF
1972 Fulvia Sport 1600
1983 HPE VX
1988 Delta 1.6GTie
1998 Zeta 21.  12v
simonandjuliet
Permanent resident
**
Posts: 2537



« Reply #2 on: 06 May, 2017, 12:07:14 PM »

Sounds like a fun kitchen table job - and very satisfying result
Logged

AmilcarCGS, ApriliaCabrio,S2Aprilia,Ardea c'cino,S4 Ardea, Appia c'cino, Appia f'cino,B20 s4,4 R4 Sinpar, R4 Rodeo, 65 Moke, 2xR60 Tractor, 2xToselli 78, Moto Guzzi Ercole, Disco 3, Mini ALL4 JCW, Moto Guzzi Cardellino, Fulvia GT, RE Himalayan, Ypsilon
lancialulu
Press Officer
Permanent resident
*****
Posts: 4895



« Reply #3 on: 06 May, 2017, 03:00:45 PM »

Actually I am not allowed to use the kitchen table for car stuff so the garage floor had to do!!!

Proved just now - so nice to see how fast this Vignale goes. I can confirm Colin Marr's earlier experience of 20 mph/1000 rpm in 4th is very fast at 2/3rds redline
Logged

Its not the winning but taking part! or is it taking apart?
Lancias:
1955 Aurelia B12
1967 Fulvia 1.3HFR
1972 Fulvia 1600HF
1972 Fulvia Sport 1600
1983 HPE VX
1988 Delta 1.6GTie
1998 Zeta 21.  12v
Pages: [1]   Go Up
  Print  
 
Jump to:  

Contact the Forum Administrator

LMC Forum copyright © 2007 - 2021 Lancia Motor Club Ltd

Powered by SMF 1.1.20 | SMF © 2006-2011, Simple Machines
Page created in 0.078 seconds with 21 queries.