Lancia Motor Club Forum Banner
25 November, 2020, 10:52:06 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Need to contact the Forum Administrator? e-mail forum.admin@lanciamc.co.uk, for Database Administrator e-mail database.admin@lanciamc.co.uk      -      Copy deadline for Viva Lancia is 12th of each month.      -      For Events e-mail events@lanciamc.co.uk      -      To Join the club go to http://www.lanciamc.co.uk/join.htm
 
   Home   Help Search Calendar Register  
Pages: [1]   Go Down
  Print  
Author Topic: Lancia Flavia 1800 Coupe dashboard  (Read 2348 times)
0 Members and 1 Guest are viewing this topic.
colinw
Member
****
Posts: 69


« on: 07 April, 2017, 08:29:48 PM »

Has anyone tried to re-varnish the dashboard (one with twin gauges)?
I ask this as I have found a car (to buy?) but someone has re-varnished the dash board a darker colour and it is wrong and flaking.
Is the dashboard real wood which can be easily rubbed down or is it just a thin veneer.?  Removal of the dashboard could be problematic.  Any help most welcomed, thank you.   
Logged
DavidLaver
Permanent resident
**
Posts: 4169



« Reply #1 on: 08 April, 2017, 04:31:03 PM »


A really lovely Fulvia dash restoration:

http://www.lancia.myzen.co.uk/forum/index.php?topic=9338.msg67396#msg67396
Logged

David Laver, Lewisham.
colinw
Member
****
Posts: 69


« Reply #2 on: 11 April, 2017, 07:37:28 PM »

Many thanks for the informative reply, so quick.

Any ideas of how to get the dash board out so work can commence?
Logged
Angle Grinder
Megaposter
*
Posts: 398



WWW
« Reply #3 on: 14 April, 2017, 11:31:48 AM »

Is it just the instrument binnacle you want to remove? If so easy-peasy... just unscrew the 4 stainless steel "knobs" two at the top and the 2 at the bottom which also serve as the dash light dimmer and trip counter reset.

If it is the whole wooden insert on the dashboard you need to get your hand up behind the bulkhead and feel for the location of several very small (6mm from memory) nuts that retain the chrome strips on the dashboard. Some of these may shear when you try to unscrew so take time and try to soak with WD40 before you start the job. You'll also need to remove the ignition switch, clock, flavia badge, ash tray, air vents etc.

It's not complicated just a bit fiddly as 2 or 3 of the bolts are very close to the steering column with poor access.
Logged

Current Cars: 1994 2.0 VIS Thema Station Wagon, 1967 Flavia 1.8 PF Coupe.

Previous cars:
1983 Prisma 1600
1991 Thema 16v i.e. SE
1988 Thema 8v Turbo
1992 Thema 16v i.e.
1983 Gamma Coupe (manual)
1993 Thema VIS
1994 Thema VIS LE
1990 Thema 2.8
bobhenry999
Megaposter
*
Posts: 282


« Reply #4 on: 03 May, 2017, 07:21:34 PM »

Colin,

I removed the dash wood trim from my earlier Coupe last winter and re-veneered it using veneer that I bought on E-bay.
It was quite a simple job as the veneer was an iron-on type.Perhaps that might be an idea for you.

Bob
Logged
lancialulu
Press Officer
Permanent resident
*****
Posts: 4041



« Reply #5 on: 04 May, 2017, 09:11:42 AM »

Is it just the instrument binnacle you want to remove? If so easy-peasy... just unscrew the 4 stainless steel "knobs" two at the top and the 2 at the bottom which also serve as the dash light dimmer and trip counter reset.

If it is the whole wooden insert on the dashboard you need to get your hand up behind the bulkhead and feel for the location of several very small (6mm from memory) nuts that retain the chrome strips on the dashboard. Some of these may shear when you try to unscrew so take time and try to soak with WD40 before you start the job. You'll also need to remove the ignition switch, clock, flavia badge, ash tray, air vents etc.

It's not complicated just a bit fiddly as 2 or 3 of the bolts are very close to the steering column with poor access.
Is this the later model. The earlier model is undone from behind.
Logged

Its not the winning but taking part! or is it taking apart?
1955 Aurelia B12
1967 Flavia Vignale iniezione
1967 Fulvia 1.3HFR
1972 Fulvia 1600HF
1972 Fulvia 1600HF
1972 1600 Fulvia Sport
1979 2500 Gamma Coupe
1988 Delta 1.6GTi
1998 Zeta
colinw
Member
****
Posts: 69


« Reply #6 on: 18 July, 2017, 01:42:43 PM »

It is the dash for the 1967 Coupe and I need to remove both the binnacle with the twin gauges and the long section with the famous clock.
Thank you
Logged
Angle Grinder
Megaposter
*
Posts: 398



WWW
« Reply #7 on: 28 July, 2017, 08:19:22 PM »

I had a carpenter friend make up a new trim section for the panels where the clock / air vents are mounted. It was quite a bit thicker than the original fascia trim, but will be much more resistant to warping. Another friend, a French Polisher, matched the colour of the wood and the final result is pretty good.

If you need advice on the removal procedure send me a PM or post something here. It's about 5 years since I did it, but I reckon I remember all the stages.



* P1000223.jpg (359.86 KB, 1024x768 - viewed 413 times.)
Logged

Current Cars: 1994 2.0 VIS Thema Station Wagon, 1967 Flavia 1.8 PF Coupe.

Previous cars:
1983 Prisma 1600
1991 Thema 16v i.e. SE
1988 Thema 8v Turbo
1992 Thema 16v i.e.
1983 Gamma Coupe (manual)
1993 Thema VIS
1994 Thema VIS LE
1990 Thema 2.8
Angle Grinder
Megaposter
*
Posts: 398



WWW
« Reply #8 on: 30 July, 2017, 04:06:26 PM »

http://www.classiclancia.com/car-parts/index.php?route=product/product&product_id=206

But it won't be a cheap option.
Logged

Current Cars: 1994 2.0 VIS Thema Station Wagon, 1967 Flavia 1.8 PF Coupe.

Previous cars:
1983 Prisma 1600
1991 Thema 16v i.e. SE
1988 Thema 8v Turbo
1992 Thema 16v i.e.
1983 Gamma Coupe (manual)
1993 Thema VIS
1994 Thema VIS LE
1990 Thema 2.8
Pages: [1]   Go Up
  Print  
 
Jump to:  

Contact the Forum Administrator

LMC Forum copyright © 2007 - 2018 Lancia Motor Club Ltd

Powered by SMF 1.1.20 | SMF © 2006-2011, Simple Machines
Page created in 0.055 seconds with 21 queries.