Lancia Motor Club Forum Banner
28 March, 2024, 06:47:54 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Need to contact the Forum Administrator? e-mail forum.admin@lanciamc.co.uk, for Database Administrator e-mail database.admin@lanciamc.co.uk      -      Copy deadline for Viva Lancia is 12th of each month.      -      For Events e-mail events@lanciamc.co.uk      -      To Join the club go to http://www.lanciamc.co.uk/join.htm
 
   Home   Help Search Calendar Register  
Pages: 1 2 3 [4]   Go Down
  Print  
Author Topic: Racing a Lancia Delta HF Integrale 16v  (Read 32668 times)
0 Members and 1 Guest are viewing this topic.
Thurbs
Member
****
Posts: 53



WWW
« Reply #45 on: 15 March, 2018, 08:56:37 PM »

The New Season Awaits
For us the winter period provides time for engineers and mechanics to do those all-important jobs which you never seem to get a chance to do through the season. As usual we have left everything until the last-minute and with only 4 weeks to go (at time of writing) the list of jobs is still long and complex. Here are some of the highlights!

Dry Weather Setup – we had some help from Rob Wheldon from Raw motorsport late in the 2017 season to help improve the car’s setup and managed to improve 3 seconds over our previous best at Donington. Doing the same in the dry won’t gain us as much time as this but will definitely move us forward on the grid (more on this in a later article).

Flatten Floor & Sump Guard – to decrease drag and improve top speed. This year’s calendar has some high speed circuits and the Delta was not the most aerodynamic of cars out of the factory.

Engine & Gearbox – as per February’s article, race engines need lots of tender loving care to deliver 500fwhp lap after lap after lap. Engine and gearbox out, stripped, checked and renewed where needed. To re-install without a leaking as the engine to gearbox seal is metal to metal and it is really hard not to have this seal weep small quantities of oil when running.

Air box – make and install a custom aluminium air box to separate air entering from the light cluster from the engine bay, hopefully reducing intake temps and adding power.

Re-fit doors – a pig of a job which will take a couple of days. Those who have seen the car up close would have noticed some “less than factory quality” shut lines with the fibre glass doors.

Investigate & Fix Knock – there is currently a knock coming from the front suspension or steering which happens on load. We need to find and fix this vital part, so we don’t end up driving straight in to a wall at any movement.

100’s of Small Jobs – including securing the LED headlights, tidying up wiring loom, securing the coil packs with a cover, fixing the rear light cluster seal, sealing up the 100’s of holes in the floor, installing the driver’s cooling fan plus much more.



Once we have done all this work is done we then need to take the car to a circuit or rolling road to perform a shakedown. After any major surgery it is wise to make sure everything has been put back in it’s right place and there are not going to be any dramas over the next race weekend. Finally testing needs to be booked prior to the first event to get me up to speed, back on the pace and ready to hammer in some good laps during qualifying.

Race Retro
It was great to chat to everyone at the Race Retro event at Stoneleigh in February. We were honoured to welcome Miki Biasion to the stand and we had a great chat about the car, what we achieved last year and our plans for 2018. A real down to earth guy who clearly has a passion for all things Lancia.









Drive Available!

Back in early 2017 we borrowed a Mitsubishi Evo 4 when the Lancia wasn’t quite ready to race. For 2018 it is available to arrive & drive from JJ Performance, our engineering partners and builder of the Lancia. Also joining us on the grid is a Subaru Impreza STI and Toyota Celica GT4! Give John Sheilds a call (http://www.jjperformance.co.uk/) and compete head to head with ourselves and other 90’s rallying icons out on the track!

https://www.youtube.com/watch?v=gnF0C8Z2jO8



Logged

Regards, Richard. | http://www.LanciaDeltaRacing.com | Lancia Delta HF Integrale 16v Group A Race Car | Lancia Delta HF Spares Car | Renault Clio 182 Race Car | BMW M5 Comp F10 Road Car
Thurbs
Member
****
Posts: 53



WWW
« Reply #46 on: 30 March, 2018, 12:42:15 PM »

Snetterton Shakedown

The team is still burning the midnight oil finishing off those last-minute jobs and making sure everything will be ok throughout the weekend.

A spring day in England can start off with snow, go through rain, wind and end up a lovely summers evening with clear blue skies. It is therefore hard to know what kind of conditions we can expect on the day, so we will be making judicious use of the weather radar apps on our phones when making the critical call as to what tyres to put on the car for each session. Nankang have confirmed their support for us throughout this year and again we will be running their semi-slick tyres during testing and the race. For dry and slippery conditions, we run the Nankang AR1 tyre which is on the MSA’s C list of competition tyres and provides excellent grip and stability from new and through hour long stints. For predicted wet and monsoon conditions we will be opting for Nankang’s MSA ‘B’ list competition tyre the Nankang NS-2R which is also legal for road use and the tyre which has seen us to two overall victories in the pouring rain.




Snetterton is situated in Norfolk, England and is the most easterly circuit in the UK we use for 2018. After its use as a USAF base, Snetterton was first used for motorcycle racing in 1953, organised by the Snetterton Combine, an association of clubs in Norfolk and Suffolk. The track was used by both Team Lotus (Formula One) and Norfolk Racing Co (Le Mans) to test their racing cars. Snetterton has 3 configurations which can be used for competition. Snetterton has undergone somewhat of a renaissance during the recent years following a multi-million pound redevelopment project at the start of 2011, which was met with rave reviews from both spectators and competitors alike. The 100 infield circuit is mostly used for sprinting with the 200 and 300 used for door to door competition. The Snetterton 300 circuit hosts the British Touring Car Championship, British Superbike Championship and British F3 and GT Championships. Snetterton is a typical post war airfield affair set in the mids of the Norfolk fens. The circuit is mostly flat with big skies above alerting you of what the weather will be 30 minutes hence.



This year the club has opted for the shorter 200 circuit and will be a good benchmark for how the car will perform over the year. A lap of the 200 circuit starts with a gentle climb up the start finish straight, hugging the put wall for added slip streaming. Richies corner is an unsighted fast right hander where only the slightest of lifts and a dab of left foot braking helps the car turn in and carry as much momentum through the apex as possible. A good exit here can bring you along side a competitor ready for a big stop in to the right hand hairpin of Montreal (what was called Wilson) sliding down the inside and ahead of your foe. The exit of Montreal is all important as instead of heading infield on the 300 configuration, the car needs to immediately turns left and head down the Bentley straight for a big drag towards the circuit’s infield bridge. The Delta should have the advantage through this tight section with good on power traction through the exit phase. After what seems like an age it gets exciting into Brundle where the car needs to brake from fifth gear down to the second gear right hand corner of Nelson all whilst going through a left hand tightening bend. Smoothness is the key here whilst not dropping too much speed on the entry. Minding the curbs on the inside of Nelson the car rockets out of the corner and soon is tipped in to the Bomb Hole. Taken much like Richies only slightly slower, the car is put in to the corner using only the smallest of lifts with a touch of left foot braking the right hander catapults you in to the never-ending corner of Coram. This right handed constant radius curve tests the balance of your car and again being smooth on the throttle and carrying as much speed around the large apex can set you up for another overtaking opportunity in to Murrays. As Murrays’ is a left hander you can be more aggressive on turn taking a wide line to the apex and get on the power early for another long drag up the start finish straight’s slight hill.



The 300 layout better suits the short wheel base of the Lancia as the 200 tends to be all about straight line speed which in turn suits cars with low drag and lots of power. There are 32 cars entered so far and cars to note in our class or fighting for overall victory includes a Seat Leon Cupra R, TVR Tuscan Challenge, 6 x BMW M3’s and a Z3M, a fellow ex rally car in the form of a Subaru Impreza WRX, Porsches 968 & a 993 911 and the drifters favourite Nissan 200SX. Having raced with most of these competitors over last year the race will prove challenging and we expect the TVR Tuscan Challenge car to drive off in the distance with it’s large V8 and space frame light weight chassis. The BMWs can never be ruled out as their long wheel base, excellent chassis balance sees them carry speed in to and through the apex better than nearly all the cars on the grid. A good result in the dry would see us finish in the top 6 and we are hoping to match or improve on our best dry result at Donnington of forth overall. Clearly in the wet with four-wheel drive, nothing short of a win will do!



On Friday the car is booked in for a full day’s testing with 4 sessions split throughout the day. The hope is to get the driver and car dialled in to the circuit and get as close to an optimum setup as possible in the time allowed.

This time last year we were still battling with getting the car ready for the start of the season and unfortunately one we lost. To try and still get a race we opted to rent a Mitsubishi Lancer Evo 4 and ended up having a frustrating weekend full of mechanical issues and dramas. You can read all about it here: http://lanciadeltaracing.com/2017/04/20/plan-b-c-d/ and watch the video here: https://www.youtube.com/watch?v=fHryJZU0saQ

We had some success at Snetterton in a Renault Clio 182 a few seasons ago and managed a second in class through the pouring rain, watch the video here: http://youtu.be/Y9KcRf1zcL8 and other races here: http://youtu.be/71075NEXpNA and here: http://youtu.be/0txHElMR66k

Stay up to date with live timing here: http://www.tsl-timing.com/event/181464 We will also be trying out broadcasting live during qualifying and the race. Stay up to date on Facebook and YouTube for the latest announcements.
Logged

Regards, Richard. | http://www.LanciaDeltaRacing.com | Lancia Delta HF Integrale 16v Group A Race Car | Lancia Delta HF Spares Car | Renault Clio 182 Race Car | BMW M5 Comp F10 Road Car
Thurbs
Member
****
Posts: 53



WWW
« Reply #47 on: 30 March, 2018, 12:43:07 PM »

Here is the video from the shakedown we did yesterday. Things didn't go brilliantly and we may have done a crank Sad.

http://www.youtube.com/watch?v=tpFBsTR7oZY
Logged

Regards, Richard. | http://www.LanciaDeltaRacing.com | Lancia Delta HF Integrale 16v Group A Race Car | Lancia Delta HF Spares Car | Renault Clio 182 Race Car | BMW M5 Comp F10 Road Car
Thurbs
Member
****
Posts: 53



WWW
« Reply #48 on: 14 June, 2018, 10:30:37 AM »

Hi all. It has been a frustrating few months with the engine in the Lancia.

For those of you not following YouTube or Facebook, here is the short story.

- After the low oil pressure from the Snetterton test, the main barings were found to be scored plus marks on the piston & 2 cam lobes rounded.
- Couldn't get ready in time for race 1 so borrowed a Mitzubishi Evo 4. Qualified 7th, on the start got up to 4th, after pit stops droped back to 6th. 5th was on the cards except for no brakes or clutch. Then ran out of fuel on the last lap and DNF'd.
- New top end and bottom end later, tested again at Snetterton and all was ok.
- Silverstone qualifying the oil pressure dropped again, withdrew from event.
- Upon investigation main barings had failed. After weeks of investigation, found the block had twisted causing the repeated failures.
- New block, piston rings and barings are now in, engine has been run in on the dyno and tested with some power runs.
- Ready for a test at Donington tomrrow before putting it on to the trailer to go to Spa next week for the Summer Classic.

Some videos with the long story!

Evo Race - https://www.youtube.com/watch?v=VV93UyGtH5g
Evo Race Full - https://www.youtube.com/watch?v=S-m0U2gbnkE
Silverstone Qualifying Full - https://www.youtube.com/watch?v=8wtQWOcGQ_A
Engine Story - https://www.youtube.com/watch?v=7ORJVNzKz_k
Engine Story Full - https://www.youtube.com/watch?v=YATS8NZOq7Y
New Engine Startup - https://www.youtube.com/watch?v=cRsbASSKB7E
Logged

Regards, Richard. | http://www.LanciaDeltaRacing.com | Lancia Delta HF Integrale 16v Group A Race Car | Lancia Delta HF Spares Car | Renault Clio 182 Race Car | BMW M5 Comp F10 Road Car
lancialulu
Press Officer
Permanent resident
*****
Posts: 4902



« Reply #49 on: 14 June, 2018, 06:38:32 PM »

Fingers crossed Richard!
Logged

Its not the winning but taking part! or is it taking apart?
Lancias:
1955 Aurelia B12
1967 Fulvia 1.3HFR
1972 Fulvia 1600HF
1972 Fulvia Sport 1600
1983 HPE VX
1988 Delta 1.6GTie
1998 Zeta 21.  12v
Thurbs
Member
****
Posts: 53



WWW
« Reply #50 on: 17 June, 2018, 07:48:13 AM »

Looks like we have a engine with stable pressure!

https://www.youtube.com/watch?v=BNdCDHjJNgE
Logged

Regards, Richard. | http://www.LanciaDeltaRacing.com | Lancia Delta HF Integrale 16v Group A Race Car | Lancia Delta HF Spares Car | Renault Clio 182 Race Car | BMW M5 Comp F10 Road Car
Pages: 1 2 3 [4]   Go Up
  Print  
 
Jump to:  

Contact the Forum Administrator

LMC Forum copyright © 2007 - 2021 Lancia Motor Club Ltd

Powered by SMF 1.1.20 | SMF © 2006-2011, Simple Machines
Page created in 0.035 seconds with 21 queries.