Lancia Motor Club Forum Banner
19 November, 2019, 10:42:21 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Search Calendar Register  
Pages: [1]   Go Down
  Print  
Author Topic: Starter Motor removal in a Kuglefisher flavia 1800  (Read 418 times)
0 Members and 1 Guest are viewing this topic.
lancialulu
Press Officer
Permanent resident
*****
Offline Offline

Posts: 3600



« on: 03 August, 2016, 03:14:50 PM »

Am a bit stuck!!!

Want to remove the starter motor from my Inezione Flavia but cannot see how without removing the Kuglefischer unit. Chinese jigsaw puzzle.

Also the orange oil filter housing may be in the way but does this come off?

Tim
Logged

Its not the winning but taking part! or is it taking apart?
1955 Aurelia B12
1967 Flavia Vignale iniezione
1967 Fulvia HFR
1972 1600 HF
1972 1600 Fulvia Sport
1978 Transformer HF3000 Strato's replica
1979 2500 Gamma Coupe
1988 Delta 1.6GTi.e.
lancialulu
Press Officer
Permanent resident
*****
Offline Offline

Posts: 3600



« Reply #1 on: 06 August, 2016, 04:49:42 PM »

Update

Not stuck anymore. There is a zero tolerance clearance between the injection pump and the top of the engine with the starter motor angled away from the pump. It fouls at the rear end of the motor after 1/4 in gap between it and the gearbox housing. Judicial use of 3 pry bar freed it eventually. Bizarre that my spare motor just slide past and into the bell housing.
Logged

Its not the winning but taking part! or is it taking apart?
1955 Aurelia B12
1967 Flavia Vignale iniezione
1967 Fulvia HFR
1972 1600 HF
1972 1600 Fulvia Sport
1978 Transformer HF3000 Strato's replica
1979 2500 Gamma Coupe
1988 Delta 1.6GTi.e.
Pages: [1]   Go Up
  Print  
 
Jump to:  

Contact the Forum Administrator

LMC Forum copyright © 2007 - 2018 Lancia Motor Club Ltd

Powered by SMF 1.1.20 | SMF © 2006-2011, Simple Machines