Lancia Motor Club Forum Banner
01 December, 2024, 09:20:08 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Need to contact the Forum Administrator? e-mail forum.admin@lanciamc.co.uk     -      Copy deadline for Viva Lancia is 12th of each month.      -      For Events e-mail events@lanciamc.co.uk      -      To Join the club go to http://www.lanciamc.co.uk/join.htm
 
   Home   Help Search Calendar Register  
Pages: [1] 2   Go Down
  Print  
Author Topic: Main beam not working update  (Read 13263 times)
0 Members and 1 Guest are viewing this topic.
bobhenry999
Megaposter
*
Posts: 350


« on: 23 July, 2016, 04:29:44 PM »

Ok,

Sorry for the delay.

I have today managed to have a look at the the lack of main beam on my 815 at last.

When I depress the switch on the column stalk there is an audible click from the relay.

I checked the bulbs and they were okay. I took the cover off the relay and operated the switch, and the "Nodding Donkey" bit did it`s job and clicked down on one of the 4 lobes on the shaft and turned it to rotate the rectangular bit through 90 degrees to either be vertical (No contact) or horizontal (Made contact), but still no main beam.

I have cleaned up all of the contact points but am now at a loss as to what is the problem.

Any help would be appreciated.

Bob
Logged

Flavia 815 Vignale
Flavia 819 Milleotto
Flavia 815 Coupe Inezione
2000HF x2
2000 Coupe
2000 Sedan x3
Current 815 Coupe Variante 1005
Parisien
Administrator
Permanent resident
*****
Posts: 4337



« Reply #1 on: 23 July, 2016, 04:38:22 PM »

If a relay involved, have a close look at the solders, a dry joint may be the cause, if needs be just re-solder them all and see if that helps


P
Logged

Frank Gallagher
bobhenry999
Megaposter
*
Posts: 350


« Reply #2 on: 23 July, 2016, 09:56:30 PM »

All the joints and connections look okay, and at the last MOT it was all working well.
Can`t fathom out why it should suddenly stop working, especially as the relay appears to be doing its "Nodding Donkey" thing, and all bulbs are ok.
Logged

Flavia 815 Vignale
Flavia 819 Milleotto
Flavia 815 Coupe Inezione
2000HF x2
2000 Coupe
2000 Sedan x3
Current 815 Coupe Variante 1005
bobhenry999
Megaposter
*
Posts: 350


« Reply #3 on: 23 July, 2016, 10:05:34 PM »

Unfortunately (Or not) I am off to France on Monday for a week, so please don`t be put out if I don`t reply to any messages of help as I don`t take my lap top when I am away to help, as I don`t take my laptop with me on holiday to prevent me looking at work e-mails !

Any help would be welcome though.

Bob
Logged

Flavia 815 Vignale
Flavia 819 Milleotto
Flavia 815 Coupe Inezione
2000HF x2
2000 Coupe
2000 Sedan x3
Current 815 Coupe Variante 1005
bobhenry999
Megaposter
*
Posts: 350


« Reply #4 on: 05 August, 2016, 08:22:55 PM »

Chaps,

Okay, back from holiday and I still can`t get the bloody main beam to work.

I think I have 2 choices that you may be able to help with;

1. Does anyone have a spare relay that I could buy or even borrow to confirm that the problems lies in the relay or not.

2. As I NEVER use my car at night, does anyone know how I could rig up a switch to operate the main beam for the MOT test, as that`s the only time it`s ever used, along with the wipers and washers. In fact, the washer bottle contains Italian water from when I bought the car in Turin 5 years ago !

Your thoughts/help would be appreciated.

Bob
Logged

Flavia 815 Vignale
Flavia 819 Milleotto
Flavia 815 Coupe Inezione
2000HF x2
2000 Coupe
2000 Sedan x3
Current 815 Coupe Variante 1005
Richard Fridd
Permanent resident
**
Posts: 3487



« Reply #5 on: 06 August, 2016, 08:30:38 AM »

Are there 12volts at the relay 'in' side and 'out' side?
Logged

Richard Nevison Fridd                                                                      Happy Lancia, Happy Life
bobhenry999
Megaposter
*
Posts: 350


« Reply #6 on: 06 August, 2016, 04:01:07 PM »

Richard,

Sorry to be a numpty, but electrics are not my thing.

How do I check that, as there seems to be quite a number of wires going in to the relay.

Bob
Logged

Flavia 815 Vignale
Flavia 819 Milleotto
Flavia 815 Coupe Inezione
2000HF x2
2000 Coupe
2000 Sedan x3
Current 815 Coupe Variante 1005
lancialulu
Press Officer
Permanent resident
*****
Posts: 5049



« Reply #7 on: 06 August, 2016, 04:46:06 PM »

Bob

Its a hard slog going through the wiring diagram but worth it as you understand a lot more about your car afterwards:-)

A simple £5 multi meter is all you need to trace circuits. Everyone is in the same boat unfortunately.
Logged

Its not the winning but taking part! or is it taking apart?
Lancias:
1955 Aurelia B12
1967 Fulvia 1.3HFR
1972 Fulvia 1600HF
1972 Fulvia Sport 1600
1983 HPE VX
1988 Delta 1.6GTie
1998 Zeta 21.  12v
Richard Fridd
Permanent resident
**
Posts: 3487



« Reply #8 on: 06 August, 2016, 05:43:28 PM »

Identify the wire which goes from the relay to the headlamp, then test for voltage between that terminal and an earthing point (ie battery negative post or bare chassis metal) Either with a test meter or 12V bulb. Which terminal? Diagram required or perhaps local garage help required if not familiar with electrical systems.
Logged

Richard Nevison Fridd                                                                      Happy Lancia, Happy Life
bobhenry999
Megaposter
*
Posts: 350


« Reply #9 on: 08 August, 2016, 10:06:25 PM »

Okay chaps,

I will have a go at your suggestions at the weekend and update you all afterwards.

Bob
Logged

Flavia 815 Vignale
Flavia 819 Milleotto
Flavia 815 Coupe Inezione
2000HF x2
2000 Coupe
2000 Sedan x3
Current 815 Coupe Variante 1005
lancialulu
Press Officer
Permanent resident
*****
Posts: 5049



« Reply #10 on: 09 August, 2016, 06:33:03 AM »

Bob

I can print you an A3 wiring diagram for your coupe if you want.....

Tim
Logged

Its not the winning but taking part! or is it taking apart?
Lancias:
1955 Aurelia B12
1967 Fulvia 1.3HFR
1972 Fulvia 1600HF
1972 Fulvia Sport 1600
1983 HPE VX
1988 Delta 1.6GTie
1998 Zeta 21.  12v
bobhenry999
Megaposter
*
Posts: 350


« Reply #11 on: 10 August, 2016, 08:20:31 PM »

Tim,

That would be a great help, as I am using the A4 one in my Repair Shop Manual and my old eyes just can`t fathom it out.

Bob
Logged

Flavia 815 Vignale
Flavia 819 Milleotto
Flavia 815 Coupe Inezione
2000HF x2
2000 Coupe
2000 Sedan x3
Current 815 Coupe Variante 1005
lancialulu
Press Officer
Permanent resident
*****
Posts: 5049



« Reply #12 on: 10 August, 2016, 08:28:17 PM »

Bob

Exact model coupe pls lhd?

Tim
Logged

Its not the winning but taking part! or is it taking apart?
Lancias:
1955 Aurelia B12
1967 Fulvia 1.3HFR
1972 Fulvia 1600HF
1972 Fulvia Sport 1600
1983 HPE VX
1988 Delta 1.6GTie
1998 Zeta 21.  12v
bobhenry999
Megaposter
*
Posts: 350


« Reply #13 on: 10 August, 2016, 09:03:40 PM »

Tim,

You are a star.

1963 815 Coupe Variante 1005, LHD.
Chassis No 8151304632.

Thanks,

Bob
Logged

Flavia 815 Vignale
Flavia 819 Milleotto
Flavia 815 Coupe Inezione
2000HF x2
2000 Coupe
2000 Sedan x3
Current 815 Coupe Variante 1005
lancialulu
Press Officer
Permanent resident
*****
Posts: 5049



« Reply #14 on: 10 August, 2016, 09:05:48 PM »

Can do this for Friday eve.
Logged

Its not the winning but taking part! or is it taking apart?
Lancias:
1955 Aurelia B12
1967 Fulvia 1.3HFR
1972 Fulvia 1600HF
1972 Fulvia Sport 1600
1983 HPE VX
1988 Delta 1.6GTie
1998 Zeta 21.  12v
Pages: [1] 2   Go Up
  Print  
 
Jump to:  

Contact the Forum Administrator

LMC Forum copyright © 2007 - 2021 Lancia Motor Club Ltd

Powered by SMF 1.1.20 | SMF © 2006-2011, Simple Machines
Page created in 0.067 seconds with 21 queries.