Lancia Motor Club Forum Banner
18 February, 2020, 09:46:18 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Search Calendar Register  
Pages: [1]   Go Down
  Print  
Author Topic: 1.6 HF S2 shell and alloy doors and boot and tons of 1.3 spares  (Read 1603 times)
0 Members and 1 Guest are viewing this topic.
ColinMarr
Permanent resident
**
Offline Offline

Posts: 1547



« on: 01 June, 2016, 02:05:26 PM »

My friend Simon (with the Fulvia S2 Saloon) has asked me to post this message:

A friend of mine has for sale at very reasonable prices:
1. a 1.6 HF S2 Lusso shell that has been chemically stripped to clean bare metal. The shell has had poor repairs in the past but is eminently fixable.
2. Perfect floor and other important panels to repair the shell. These are NOT pattern but were cut out of a structurally rust free 1.3.
3. A pair of alloy doors, good usable condition.
4. An alloy boot lid, good.
5. A steel bonnet that has been chemically stripped, needs front end repair.
6. Almost all mechanical, trim etc parts from TWO 1.3 S2 (I think) cars that were scrapped.

These are his descriptions,I have only seen pictures of the shell (it's on ebay now), so check everything with him, not me.
Call Keith on 07749 877214. Located near Colchester, UK.
« Last Edit: 01 June, 2016, 04:14:51 PM by ColinMarr » Logged
SanRemo78
Megaposter
*
Offline Offline

Posts: 584



« Reply #1 on: 01 June, 2016, 08:09:28 PM »

Got to be one for Chugga to save? Couple of weekends work for him!
Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  

Contact the Forum Administrator

LMC Forum copyright © 2007 - 2018 Lancia Motor Club Ltd

Powered by SMF 1.1.20 | SMF © 2006-2011, Simple Machines