Lancia Motor Club Forum Banner
09 December, 2024, 01:11:37 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Need to contact the Forum Administrator? e-mail forum.admin@lanciamc.co.uk     -      Copy deadline for Viva Lancia is 12th of each month.      -      For Events e-mail events@lanciamc.co.uk      -      To Join the club go to http://www.lanciamc.co.uk/join.htm
 
   Home   Help Search Calendar Register  
Pages: [1]   Go Down
  Print  
Author Topic: Flavia Vignale Boot Lid Support (spring inside)  (Read 3742 times)
0 Members and 1 Guest are viewing this topic.
lendickins
Member
**
Posts: 21


« on: 11 April, 2016, 07:20:32 AM »

Does anyone know how to get the boot lid support unit working properly.

After some years it stops supporting the lid when open.

It would seem the spring loses its "springyness" and fails to keep the lid open.

It has been suggested to pack out the end of the spring, but since the spring is fully compressed (spring expands when lid opens) when the lid is closed that idea does not work.

Does anyone have any tips or perhaps a good working unit I could purchase?

Cheers

Len
Logged
JohnMillham
Lapsed
Permanent resident
**
Posts: 1045



« Reply #1 on: 11 April, 2016, 08:08:11 AM »

Does anyone know how to get the boot lid support unit working properly.

After some years it stops supporting the lid when open.

It would seem the spring loses its "springyness" and fails to keep the lid open.

It has been suggested to pack out the end of the spring, but since the spring is fully compressed (spring expands when lid opens) when the lid is closed that idea does not work.

Does anyone have any tips or perhaps a good working unit I could purchase?

Cheers

Len
If you can get at he spring, perhaps you could stretch it - or find a longer or stronger one.
Regards, John
« Last Edit: 11 April, 2016, 02:16:36 PM by JohnMillham » Logged
williamcorke
Rebel Poster
*
Posts: 714


B10


« Reply #2 on: 11 April, 2016, 09:54:31 AM »

My Vignale came with a bamboo stick to use as a support strut when the boot is open. If you manage to find a fix or supplier of replacement springs, I'd love to know.

Logged

'37 Aprilia
'50 B10
'53 B20
'68 Flavia Vignale
'55 Giulietta Sprint
S1 Land Rover
lancialulu
Press Officer
Permanent resident
*****
Posts: 5054



« Reply #3 on: 11 April, 2016, 10:50:51 AM »

My previos Vignale worked on the level - just but any down slope forget it as you could lose your head (had a stick in the boot afterwards)

My latest project Vignale was the same until the car was bare metal repainted when have a ton of filler was removed from the boot skin. Now the poor little spring thing copes quite well. Message - the boot lid is to heavy not the spring is too weak....
Logged

Its not the winning but taking part! or is it taking apart?
Lancias:
1955 Aurelia B12
1967 Fulvia 1.3HFR
1972 Fulvia 1600HF
1972 Fulvia Sport 1600
1983 HPE VX
1988 Delta 1.6GTie
1998 Zeta 21.  12v
lendickins
Member
**
Posts: 21


« Reply #4 on: 26 April, 2016, 07:32:35 PM »

This is the solution for all you Flavia Vignales!
Contact SGS Engineering in Derby who make custom gas struts, ask for Thomas. He will recall he just provided a gas strut for me.
It's about £40 all in. I have fitted it and it looks and works fine.
Cheers
Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  

Contact the Forum Administrator

LMC Forum copyright © 2007 - 2021 Lancia Motor Club Ltd

Powered by SMF 1.1.20 | SMF © 2006-2011, Simple Machines
Page created in 0.028 seconds with 20 queries.