Lancia Motor Club Forum Banner
22 April, 2019, 03:08:59 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Search Calendar Register  
Pages: [1]   Go Down
  Print  
Author Topic: engine advice  (Read 1333 times)
0 Members and 1 Guest are viewing this topic.
bali
Guest
« on: 03 October, 2007, 09:18:10 PM »

i own a lancia prisma symbol which im planning to get back on the road by the end of october.
wat i would like todo is to fit an engine from a lancia delta hf.
is it possible to fit a delta engine into a prisma?Huh?
Logged
fensaddler
Lapsed
Permanent resident
**
Offline Offline

Posts: 1082



« Reply #1 on: 03 October, 2007, 10:08:49 PM »

In principle, providing they are both post-86 cars, yes.  The engine block is the same, but I imagine the plumbing for the Turbo and issues like wiring may cause you some thought.  Likewise, you will need to think about uprating the brakes in particular (though this is pretty simple - the vented front discs and solid rear discs from a Turbo bolt straight on to replace what I'm assuming is a disc/drum set up on the Symbol).  Others will know considerably more than me, I imagine.
Logged

Chris Owen
13245
1987 Delta 1.3LX
2012 Skoda Yeti 112TSi 4WD
chugga boom
Non-LMC Seller
Permanent resident
**
Offline Offline

Posts: 1754



« Reply #2 on: 04 October, 2007, 08:17:00 AM »

about 10 yrs ago a friend of mine bought a very rotton hf turbo ie and a very sound prisma symbol and did exactly what you plan, he just dropped the whole front ends and swapped them over and the engine loom, at the time i had an rs turbo ( i know i know those days are gone!!) and the prisma was far quicker!! it was a real street sleeper as most people didn't know what it was then, good luck and you won't be dissapointed
Logged

1935 augusta lusso (chugga)
1935 belna saloon
1935 augusta lusso
1938 ardenne
1939 aprilia lusso
1958 appia s2
1963 appia s3 
195? appia camioncino
1972 fulvia 1600HF
1976 fulvia coupe
194? ardea SUV  "THE BEAST!!!"
bali
Guest
« Reply #3 on: 07 October, 2007, 09:15:36 PM »

thanks for the advice. gettin excited now, now that i know it can done it must be tried Smiley
the prisma symbol comes with discs all round so hopefully putting vented discs on wont be too hard.
Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  

Contact the Forum Administrator

LMC Forum copyright © 2007 - 2018 Lancia Motor Club Ltd

Powered by SMF 1.1.20 | SMF © 2006-2011, Simple Machines