Lancia Motor Club Forum Banner
10 December, 2024, 05:07:54 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Need to contact the Forum Administrator? e-mail forum.admin@lanciamc.co.uk     -      Copy deadline for Viva Lancia is 12th of each month.      -      For Events e-mail events@lanciamc.co.uk      -      To Join the club go to http://www.lanciamc.co.uk/join.htm
 
   Home   Help Search Calendar Register  
Pages: 1 [2]   Go Down
  Print  
Author Topic: Fulvia series 1 brake problems  (Read 10347 times)
0 Members and 1 Guest are viewing this topic.
nistri
Megaposter
*
Posts: 564


« Reply #15 on: 03 June, 2014, 11:58:50 AM »

Hi Chris,

I never had the need to touch the limiter valve on my GTE although I do replace brake fluid every 2 years. With the engine running, everything is much easier (no bleed nipples on the servo, at least on the two I had on my car-one original and kaput- and the new one). The servo is the same as on standard Alfa Romeo Giulias of the late 60s.
On S2 Fulvias I agree that it is essential to jack up the rear axle to fully open the limiter valve. Cheers, Andrea

Logged

Andrea Nistri

Ardea S2
Appia S2
Fulvia GTE
Fulvia Sport 1.3 S
Fulvia Montecarlo
Fulvia Coupe 1.3 S
libbyvic
Lapsed
Senior Member
*****
Posts: 109



« Reply #16 on: 28 July, 2014, 09:04:13 PM »

The brake master cylinder seems to be faulty as 2 garages later and all the techniques known to man, there is no pressure. The fluid must be passing over the seals. They have been changed for a new set as well!

So, has anyone a used one that I can try with new seals?

M
Logged

1968 Fulvia Sport S1 Zagato
chriswgawne
Permanent resident
**
Posts: 2086



« Reply #17 on: 28 July, 2014, 10:21:48 PM »

Omicron do a bore polish, reseal and bench test service on your own m/cylinder.
I haven't used it (yet) but Martin assures me it works!
Chris
Logged

Chris Gawne
Mobile: 07778 216552
lancialulu
Press Officer
Permanent resident
*****
Posts: 5054



« Reply #18 on: 29 July, 2014, 05:44:07 AM »

Persevere with bleeding.. Try gravity alone at the back first. It takes a long time. I assist with a little (2psi) pressure at the fluid filler on the master cyl. Keep an eye on topping up fluid. When the backs show fluid ,do the fronts. Are you sure the internals of the m/c are correctly assembled and the valving is not gummed up?
Logged

Its not the winning but taking part! or is it taking apart?
Lancias:
1955 Aurelia B12
1967 Fulvia 1.3HFR
1972 Fulvia 1600HF
1972 Fulvia Sport 1600
1983 HPE VX
1988 Delta 1.6GTie
1998 Zeta 21.  12v
Pages: 1 [2]   Go Up
  Print  
 
Jump to:  

Contact the Forum Administrator

LMC Forum copyright © 2007 - 2021 Lancia Motor Club Ltd

Powered by SMF 1.1.20 | SMF © 2006-2011, Simple Machines
Page created in 0.061 seconds with 21 queries.