Lancia Motor Club Forum Banner
22 September, 2019, 12:45:03 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Search Calendar Register  
Pages: [1]   Go Down
  Print  
Author Topic: Delta 1.6 i.e. idling problem  (Read 1531 times)
0 Members and 1 Guest are viewing this topic.
lancialulu
Press Officer
Permanent resident
*****
Offline Offline

Posts: 3552



« on: 16 July, 2014, 11:22:02 AM »

Anyone know about the Delta bosch i.e. system?

My car starts and idles from cold fine. However, it stalls every time it comes off revs (so when it comes to a junction). Restarts fine and idles although it hunts between 500 and1200 before settling to c1000 ( on the rev counter).

When hot or cold it does the same thing. It also runs fine when not at idle.

Before I try looking at all the sensors can anyone suggest anything?
Logged

Its not the winning but taking part! or is it taking apart?
1955 Aurelia B12
1967 Flavia Vignale iniezione
1967 Fulvia HFR
1972 1600 HF
1972 1600 Fulvia Sport
1978 Transformer HF3000 Strato's replica
1979 2500 Gamma Coupe
1988 Delta 1.6GTi.e.
fay66
Permanent resident
**
Offline Offline

Posts: 5702



« Reply #1 on: 16 July, 2014, 05:19:33 PM »

Anyone know about the Delta bosch i.e. system?

My car starts and idles from cold fine. However, it stalls every time it comes off revs (so when it comes to a junction). Restarts fine and idles although it hunts between 500 and1200 before settling to c1000 ( on the rev counter).

When hot or cold it does the same thing. It also runs fine when not at idle.

Before I try looking at all the sensors can anyone suggest anything?

Tim,
Try cleaning the idle control Valve, and the throttle switch that attaches to the butterfly at the intake, as they tend to get gummed up with petrol deposits.

Brian
8227 Cool
Logged

Own 1966 Fulvia 2C Berlina since 1997, back on road 11-1999.Known as "Fay"
1999 Suzuki Wagon R+ GL, now my daughters
2006 Renault Megane 1 5 Dci Sports Tourer
Dedra Technical Adviser
SanRemo78
Megaposter
*
Offline Offline

Posts: 571



« Reply #2 on: 16 July, 2014, 06:35:55 PM »

Try the connections on the temperature sender, these can sometimes cause an erratic idle.

Guy
Logged
lancialulu
Press Officer
Permanent resident
*****
Offline Offline

Posts: 3552



« Reply #3 on: 17 July, 2014, 07:37:35 AM »

Ta for thoughts.

Seems the throttle position sensor is sensitive to "throttle closed" position for something to create a "soft tickover point" in the ecu. The TPS on my car had worked loose and by trial and error I think I have found the correct setting. Time will tell.
Logged

Its not the winning but taking part! or is it taking apart?
1955 Aurelia B12
1967 Flavia Vignale iniezione
1967 Fulvia HFR
1972 1600 HF
1972 1600 Fulvia Sport
1978 Transformer HF3000 Strato's replica
1979 2500 Gamma Coupe
1988 Delta 1.6GTi.e.
lancialulu
Press Officer
Permanent resident
*****
Offline Offline

Posts: 3552



« Reply #4 on: 23 July, 2014, 07:02:30 AM »

After a number of attempts to get a stable tick over it seems that the Trottle Position Sensor (TPS) which is a quite large potentiometer fitted to the throttle spindle is worn and does not give reliable results at the zero to 100ohm part of its operation.

I am putting a call out for anyone who may have a replacement they could sell me. It is a Weber PF09.

Also has anyone had experience of fitting an Intermoter replacement?
Logged

Its not the winning but taking part! or is it taking apart?
1955 Aurelia B12
1967 Flavia Vignale iniezione
1967 Fulvia HFR
1972 1600 HF
1972 1600 Fulvia Sport
1978 Transformer HF3000 Strato's replica
1979 2500 Gamma Coupe
1988 Delta 1.6GTi.e.
rogerelias
Rebel Poster
*
Offline Offline

Posts: 933


MY 1600HF IN HEARTBEAT GARAGE


« Reply #5 on: 23 July, 2014, 11:28:32 AM »

See note under spares required Smiley
Logged

FULVIA 1600HF LUSSO
1958 VELOCETTE MAC
Triumph Bonneville t120v 1972
1968 MGC ROADSTER
1958 Series 2 Appia berlina
Pages: [1]   Go Up
  Print  
 
Jump to:  

Contact the Forum Administrator

LMC Forum copyright © 2007 - 2018 Lancia Motor Club Ltd

Powered by SMF 1.1.20 | SMF © 2006-2011, Simple Machines