Lancia Motor Club Forum Banner
16 November, 2019, 01:13:21 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Search Calendar Register  
Pages: [1]   Go Down
  Print  
Author Topic: GROUP 4 EXHAUSTS  (Read 4323 times)
0 Members and 1 Guest are viewing this topic.
chugga boom
Non-LMC Seller
Permanent resident
**
Offline Offline

Posts: 1754



« on: 07 July, 2014, 06:57:41 PM »

I'm building another 1600Hf for a customer at the moment , after hearing how impressive the last one went he too wants to go down the group 4 modifications route , after much trawling over the internet and phone calls to suppliers he has had no luck being able to source a group 4 exhaust in stainless steel only mild steel , I have a mild steel system to copy and have been in touch with a company local to me to copy the exhaust for my customers car .
I intend on dropping him off the full front subframe and my exhaust system so he has an exact "jig" to work from then when the subframe is fitted to the car take the car to him to finish the rear section on the car so it fits correctly .
I trust the company 100% and have seen their work for the last 10 yrs which has always been 110% quality wise , obviously if a batch were made the price would reduce so I'm asking if anyone is interested before I go ahead and get just 2 systems made
Anyone interested just drop me an email      jamesparry1@btconnect.com   and I will discuss prices and options
Logged

1935 augusta lusso (chugga)
1935 belna saloon
1935 augusta lusso
1938 ardenne
1939 aprilia lusso
1958 appia s2
1963 appia s3 
195? appia camioncino
1972 fulvia 1600HF
1976 fulvia coupe
194? ardea SUV  "THE BEAST!!!"
angelorange
Megaposter
*
Offline Offline

Posts: 317



WWW
« Reply #1 on: 23 August, 2014, 10:43:49 AM »

Pics of GP4 exhaust that might be of use from my race car:  http://www.lukafoto.com/racing/Fulvia%20Exhaust/Manifold/index.html

Chaps in Mansfield Notts. offered to do the same - i.e: jig and make SS. Have done systems for several car clubs from Jags to Citroens. They produced my side exit bossato style in SS to meet current MSA noise regs.


Best Rgds


Logged

I'm entitled to my ignorance!
chugga boom
Non-LMC Seller
Permanent resident
**
Offline Offline

Posts: 1754



« Reply #2 on: 04 March, 2015, 07:22:22 PM »

finally had one made for my customers car, fantastic job


* group4au.jpg (50.69 KB, 720x405 - viewed 840 times.)

* group4b.jpg (48.43 KB, 405x720 - viewed 759 times.)
Logged

1935 augusta lusso (chugga)
1935 belna saloon
1935 augusta lusso
1938 ardenne
1939 aprilia lusso
1958 appia s2
1963 appia s3 
195? appia camioncino
1972 fulvia 1600HF
1976 fulvia coupe
194? ardea SUV  "THE BEAST!!!"
Neil
Rebel Poster
*
Offline Offline

Posts: 885



« Reply #3 on: 04 March, 2015, 07:29:41 PM »

James, looks great, does it require fitting with the engine out or subframe modification?
Logged

Neil   
386

1973 Fulvia S2 1.3
chugga boom
Non-LMC Seller
Permanent resident
**
Offline Offline

Posts: 1754



« Reply #4 on: 04 March, 2015, 07:35:58 PM »

I dropped the whole subframe off and it was made to fit it with no modifications , it does split so should be able to fit with engine in situ , it will certainly fit with the subframe out with ease which is how I'm fitting it , it was a copy of an existing system that I bought second hand however much improved , after seeing it today I've ordered one for myself , knew I couldn't resit  Roll Eyes this is who made it
 http://www.alunox.co.uk/
Logged

1935 augusta lusso (chugga)
1935 belna saloon
1935 augusta lusso
1938 ardenne
1939 aprilia lusso
1958 appia s2
1963 appia s3 
195? appia camioncino
1972 fulvia 1600HF
1976 fulvia coupe
194? ardea SUV  "THE BEAST!!!"
simonandjuliet
Permanent resident
**
Offline Offline

Posts: 2007



« Reply #5 on: 04 March, 2015, 08:09:55 PM »

How does the 2 into 1 work ? Or are you planning to keep the 2 apart and have 2 tail pipes ??

Or side pipes ........ on a Fulvia, how cool would that be ?
Logged

S1 Aprilia Cabrio, S2 Aprilia, S1 Promiscuo,S2 camioncino, S2 furgoncino, S3 Appia, R4 Sinpar, R4 Rodeo, R60 Tractor, Moto Guzzi Ercole, Disco 3, Mini ALL4 JCW, Moto Guzzi Cardellino 73,Fulvia Berlina GT, Fulvia Rallye S, Fulvia 1600 HF,
chugga boom
Non-LMC Seller
Permanent resident
**
Offline Offline

Posts: 1754



« Reply #6 on: 04 March, 2015, 08:24:55 PM »

its basically a Y pipe , no transverse box its an all inline system , the rest of the system will be finished in the next month or so when the whole car goes to alunox  , will put pictures up when its done
Logged

1935 augusta lusso (chugga)
1935 belna saloon
1935 augusta lusso
1938 ardenne
1939 aprilia lusso
1958 appia s2
1963 appia s3 
195? appia camioncino
1972 fulvia 1600HF
1976 fulvia coupe
194? ardea SUV  "THE BEAST!!!"
fay66
Permanent resident
**
Offline Offline

Posts: 5730



« Reply #7 on: 05 March, 2015, 01:18:01 AM »

How does the 2 into 1 work ? Or are you planning to keep the 2 apart and have 2 tail pipes ??

Or side pipes ........ on a Fulvia, how cool would that be ?

How about this? belongs to my friend william Vandersman from the Netherlands, and is fitted to his lovely 1.2HF.

Other photo same day Goodwood Revival 2009

Brian
8227 Cool


* Side Exit copy.jpg (103.93 KB, 500x375 - viewed 679 times.)

* DSCF0038.JPG (368.75 KB, 1600x1200 - viewed 177 times.)
Logged

Own 1966 Fulvia 2C Berlina since 1997, back on road 11-1999.Known as "Fay"
1999 Suzuki Wagon R+ GL, now my daughters
2006 Renault Megane 1 5 Dci Sports Tourer
Dedra Technical Adviser
chriswgawne
Permanent resident
**
Offline Offline

Posts: 1405



« Reply #8 on: 05 March, 2015, 06:21:58 AM »

My Fulvia 1.6 HFS replica built by Paul Collins in the late 80's at Weylock had this style manifold (from Barry Waterhouse) and then a side exhaust exiting just ahead of the lhs rear wheel using a Brabham race car silencer (Brabham were next door to Weylock). Fabulous noise and highly illegal but I never got stopped. I believe the car still exists with body bracing  but the mag wheels, hot engine etc have been removed and sold
Chris
Logged

Chris Gawne
Mobile: 07778 216552
Neil
Rebel Poster
*
Offline Offline

Posts: 885



« Reply #9 on: 05 March, 2015, 08:26:46 AM »

James, I guess the manifold and the down pipe or Y section could then fit to usual Fulvia exhaust system with some adjustment, rather than the in the inline box?

Chris, I remember the car being built by Paul, he worked on my car at the same time in a Byfleet farmyard, it had my alloy bonnet fitted less the scoop, but that is another story! A fast blast round Goodwood on a track day in about 1988 was quite loud from memory even with a helmet, but fun.
Logged

Neil   
386

1973 Fulvia S2 1.3
chugga boom
Non-LMC Seller
Permanent resident
**
Offline Offline

Posts: 1754



« Reply #10 on: 07 March, 2015, 07:07:28 PM »

ok so there has been a few emails about costs on this exhaust since the pictures went up and questions about fit and clearance , I've been in touch with alunox who are coming back to me with a bulk price this week , anyone interested please get in touch jamesparry1@btconnect.com


* exhaust 001.JPG (72.86 KB, 640x480 - viewed 637 times.)

* exhaust 002.JPG (67.53 KB, 640x480 - viewed 631 times.)

* exhaust 003.JPG (57.48 KB, 640x480 - viewed 635 times.)

* exhaust 004.JPG (75.12 KB, 640x480 - viewed 675 times.)
Logged

1935 augusta lusso (chugga)
1935 belna saloon
1935 augusta lusso
1938 ardenne
1939 aprilia lusso
1958 appia s2
1963 appia s3 
195? appia camioncino
1972 fulvia 1600HF
1976 fulvia coupe
194? ardea SUV  "THE BEAST!!!"
angelorange
Megaposter
*
Offline Offline

Posts: 317



WWW
« Reply #11 on: 10 March, 2015, 07:49:45 PM »

Looks well made.

Old Bassato type side exit on my race car:

http://lukafotocom.ipage.com/racing/Fulvia%20Exhaust/Underside/index.html

SS version :

http://lukafotocom.ipage.com/racing/Fulvia%20Exhaust/FulviaSS/

If an adaptor can be made to straighten out pipe to my expansion box, might be interested.
« Last Edit: 10 March, 2015, 07:51:52 PM by angelorange » Logged

I'm entitled to my ignorance!
lancialulu
Press Officer
Permanent resident
*****
Offline Offline

Posts: 3596



« Reply #12 on: 03 April, 2015, 07:57:50 AM »

Just an update. James has asked me to let those interested know that a batch of these is on hold for the time being.
Logged

Its not the winning but taking part! or is it taking apart?
1955 Aurelia B12
1967 Flavia Vignale iniezione
1967 Fulvia HFR
1972 1600 HF
1972 1600 Fulvia Sport
1978 Transformer HF3000 Strato's replica
1979 2500 Gamma Coupe
1988 Delta 1.6GTi.e.
Pages: [1]   Go Up
  Print  
 
Jump to:  

Contact the Forum Administrator

LMC Forum copyright © 2007 - 2018 Lancia Motor Club Ltd

Powered by SMF 1.1.20 | SMF © 2006-2011, Simple Machines