Lancia Motor Club Forum Banner
19 April, 2019, 05:27:55 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Search Calendar Register  
Pages: 1 ... 34 35 36 37 38 [39] 40 41 42   Go Down
  Print  
Author Topic: Story so far series 1 resto  (Read 75066 times)
0 Members and 1 Guest are viewing this topic.
lancianut666
Rebel Poster
*
Offline Offline

Posts: 947


Slow but rough


« Reply #570 on: 09 January, 2019, 10:06:41 AM »

Happy New Year to all
Not much done of late as my dear old Mum who has been ill for some time has passed away so it will be a few weeks till everything is sorted...however did manage to keep the starter motor project on track as I sent a crankcase, bellhousing and engine mounting down to Wosp followed by the prototype starter so we will hopefully have some news before the end of the month.
Clarkey
piccy is from near Hartlepool where the old flood defences have been updated and new lagoons have been created so this tree finds itself in a tough place as the water will be brackish.


* P1050011.JPG (529.94 KB, 1600x1200 - viewed 37 times.)
Logged

Fulvia Coupe S2 Flavia Coupe 1967 1.8 Kugelfischer Prisma 1.6 carb Y10 Fila Y10 Touring Dedra 1.8 Dedra 2.0 Turbo Appia S1
lancianut666
Rebel Poster
*
Offline Offline

Posts: 947


Slow but rough


« Reply #571 on: 08 February, 2019, 09:06:03 AM »

Mystery parcel is on it's way from the starter motor people...watch this space
Clarkey
Logged

Fulvia Coupe S2 Flavia Coupe 1967 1.8 Kugelfischer Prisma 1.6 carb Y10 Fila Y10 Touring Dedra 1.8 Dedra 2.0 Turbo Appia S1
lancianut666
Rebel Poster
*
Offline Offline

Posts: 947


Slow but rough


« Reply #572 on: 08 February, 2019, 12:24:33 PM »

Here it is...looks just like the last one Doh!


* 20190208_113315.jpg (2182.01 KB, 3264x1836 - viewed 24 times.)
Logged

Fulvia Coupe S2 Flavia Coupe 1967 1.8 Kugelfischer Prisma 1.6 carb Y10 Fila Y10 Touring Dedra 1.8 Dedra 2.0 Turbo Appia S1
lancianut666
Rebel Poster
*
Offline Offline

Posts: 947


Slow but rough


« Reply #573 on: 09 February, 2019, 05:11:49 PM »

Great news!!! it fits...still had to remove the engine mounting but about an hour in a freezing cold garage saw the new motor installed and connected up and the engine mounting back on. Quick connect up of the battery and off it went sounds about 5 times faster than the old one so a charge up of the battery a gallon of fuel and we will see what occurs
Clarkey


* 20190208_113315.jpg (2182.01 KB, 3264x1836 - viewed 17 times.)
Logged

Fulvia Coupe S2 Flavia Coupe 1967 1.8 Kugelfischer Prisma 1.6 carb Y10 Fila Y10 Touring Dedra 1.8 Dedra 2.0 Turbo Appia S1
lancianut666
Rebel Poster
*
Offline Offline

Posts: 947


Slow but rough


« Reply #574 on: 09 February, 2019, 05:19:17 PM »

Oops


* DSCN2634.JPG (893.9 KB, 2592x1944 - viewed 20 times.)
Logged

Fulvia Coupe S2 Flavia Coupe 1967 1.8 Kugelfischer Prisma 1.6 carb Y10 Fila Y10 Touring Dedra 1.8 Dedra 2.0 Turbo Appia S1
lancianut666
Rebel Poster
*
Offline Offline

Posts: 947


Slow but rough


« Reply #575 on: 09 February, 2019, 05:20:44 PM »

And a close up


* DSCN2635.JPG (940.42 KB, 2592x1944 - viewed 14 times.)
Logged

Fulvia Coupe S2 Flavia Coupe 1967 1.8 Kugelfischer Prisma 1.6 carb Y10 Fila Y10 Touring Dedra 1.8 Dedra 2.0 Turbo Appia S1
Richard Fridd
Permanent resident
**
Offline Offline

Posts: 2816



« Reply #576 on: 10 February, 2019, 09:27:05 AM »

Very interested in an improved starter motor. Are high torque and gear reduction starter motors the same thing? How does the claim of faster turning with less current work? Not expensive either.
Logged

Richard Nevison Fridd
lancianut666
Rebel Poster
*
Offline Offline

Posts: 947


Slow but rough


« Reply #577 on: 10 February, 2019, 11:15:15 AM »

Reading the bumph it seems to be down to more modern conducting materials used in the construction...I was pleasantly surprised at the improvement also the engine was stone cold and it had not been turned over for weeks... the plugs were out but the oil would have drained back into the sump and the bores would be dry... I will try some molyslip down the bores before I try to start it up. In addition I will put some gearbox oil in.
Clarkey
Logged

Fulvia Coupe S2 Flavia Coupe 1967 1.8 Kugelfischer Prisma 1.6 carb Y10 Fila Y10 Touring Dedra 1.8 Dedra 2.0 Turbo Appia S1
Jaydub
Senior Member
*****
Offline Offline

Posts: 153


« Reply #578 on: 10 February, 2019, 12:01:22 PM »

Richard
The High Torque and Gear Reduction starter motors are one and the same. We use them on all our high compression race engines as they spin over much faster and take less current which is essential on cars with no charging systems. The higher torque  ( turning Effort) is achieved by gear reduction of the motor, either by planetary as in an automatic gearbox or gears in mesh as in a conventional gearbox. Simply put, it`s like using a long bar to loosen wheel nuts, which requires less effort and therefore less current which is electrical effort.
I hope I haven`t over complicated it.

John
Logged

1600 HF. S2.
Dave Gee
Member
****
Online Online

Posts: 96


« Reply #579 on: 10 February, 2019, 02:13:42 PM »

I have had one on my flaminia for a long time and it grate

Dave
Logged
lancianut666
Rebel Poster
*
Offline Offline

Posts: 947


Slow but rough


« Reply #580 on: 10 February, 2019, 07:03:45 PM »

Castrol Classic EP90 for the gearbox?
Logged

Fulvia Coupe S2 Flavia Coupe 1967 1.8 Kugelfischer Prisma 1.6 carb Y10 Fila Y10 Touring Dedra 1.8 Dedra 2.0 Turbo Appia S1
lancialulu
Press Officer
Permanent resident
*****
Offline Offline

Posts: 3463



« Reply #581 on: 10 February, 2019, 07:17:28 PM »

Castrol Classic EP90 for the gearbox?
ST90?  EP attacks the brass bits inside Lancia gearboxs IIRC.
Logged

Its not the winning but taking part! or is it taking apart?
1955 Aurelia B12
1967 Flavia Vignale iniezione
1967 Fulvia HFR
1972 1600 HF
1972 1600 Fulvia Sport
1978 Transformer HF3000 Strato's replica
1979 2500 Gamma Coupe
1988 Delta 1.6GTi.e.
lancianut666
Rebel Poster
*
Offline Offline

Posts: 947


Slow but rough


« Reply #582 on: 11 February, 2019, 10:50:39 AM »

Hi Lancialulu
Confusion reigns this is from the workshop manual
Clarkey

* lubricants.pdf (425.42 KB - downloaded 20 times.)
Logged

Fulvia Coupe S2 Flavia Coupe 1967 1.8 Kugelfischer Prisma 1.6 carb Y10 Fila Y10 Touring Dedra 1.8 Dedra 2.0 Turbo Appia S1
lancianut666
Rebel Poster
*
Offline Offline

Posts: 947


Slow but rough


« Reply #583 on: 11 February, 2019, 11:00:51 AM »

and this is from a S3 user manual

* lubricants for S3.pdf (905.11 KB - downloaded 16 times.)
Logged

Fulvia Coupe S2 Flavia Coupe 1967 1.8 Kugelfischer Prisma 1.6 carb Y10 Fila Y10 Touring Dedra 1.8 Dedra 2.0 Turbo Appia S1
lancialulu
Press Officer
Permanent resident
*****
Offline Offline

Posts: 3463



« Reply #584 on: 11 February, 2019, 12:35:33 PM »

and this is from a S3 user manual
EP90 seems ok then. At least it is readily available. From an online article GL4 spec seems to be the oil for Brass Syncronisers
https://www.widman.biz/uploads/Transaxle_oil.pdf
Logged

Its not the winning but taking part! or is it taking apart?
1955 Aurelia B12
1967 Flavia Vignale iniezione
1967 Fulvia HFR
1972 1600 HF
1972 1600 Fulvia Sport
1978 Transformer HF3000 Strato's replica
1979 2500 Gamma Coupe
1988 Delta 1.6GTi.e.
Pages: 1 ... 34 35 36 37 38 [39] 40 41 42   Go Up
  Print  
 
Jump to:  

Contact the Forum Administrator

LMC Forum copyright © 2007 - 2018 Lancia Motor Club Ltd

Powered by SMF 1.1.20 | SMF © 2006-2011, Simple Machines