Lancia Motor Club Forum Banner
03 December, 2024, 09:00:57 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Need to contact the Forum Administrator? e-mail forum.admin@lanciamc.co.uk     -      Copy deadline for Viva Lancia is 12th of each month.      -      For Events e-mail events@lanciamc.co.uk      -      To Join the club go to http://www.lanciamc.co.uk/join.htm
 
   Home   Help Search Calendar Register  
Pages: 1 ... 9 10 11 12 13 [14] 15 16 17 18 19 ... 54   Go Down
  Print  
Author Topic: Story so far series 1 resto  (Read 351719 times)
0 Members and 1 Guest are viewing this topic.
lancialulu
Press Officer
Permanent resident
*****
Posts: 5050



« Reply #195 on: 22 April, 2015, 09:35:10 PM »

Hi all
anti-climax here .. just a few subdued pops and an exhaust fume aroma.. I'm thinking the poor old thing has not got enough compression to suck any petrol air mixture in never mind squeeze it and make it go bang.. will sleep on it and have another play tomorrow.
Clarkey
Check ignition timing/ plug lead order....generally the lowest compresion engines run if timed correctly....
Logged

Its not the winning but taking part! or is it taking apart?
Lancias:
1955 Aurelia B12
1967 Fulvia 1.3HFR
1972 Fulvia 1600HF
1972 Fulvia Sport 1600
1983 HPE VX
1988 Delta 1.6GTie
1998 Zeta 21.  12v
lancianut666
Permanent resident
**
Posts: 1781


Slow but rough


« Reply #196 on: 23 April, 2015, 07:47:36 AM »

Hi
I checked the leads yesterday no probs there, next thing is the timing and possibly if I can find it a compression test. There seems to be no suck at all ..I'm wondering if a couple of valves are stuck open or burnt out. Even after a lot of cranking with the cold start device on the spark plugs are bone dry. I will pop the exhaust valve cover off and see what is going on and check the timing. I have a copy of the repair manual and it gives instructions on checking the timing.
Clarkey
Logged

Fulvia Coupe S2 Flavia Coupe 1967 1.8 Kugelfischer Prisma 1.6 carb Y10 Fila Y10 Touring Dedra 1.8 Dedra 2.0 Turbo Appia S1
peteracs
Administrator
Rebel Poster
*****
Posts: 916



« Reply #197 on: 23 April, 2015, 08:06:41 AM »

Hi
I checked the leads yesterday no probs there, next thing is the timing and possibly if I can find it a compression test. There seems to be no suck at all ..I'm wondering if a couple of valves are stuck open or burnt out. Even after a lot of cranking with the cold start device on the spark plugs are bone dry. I will pop the exhaust valve cover off and see what is going on and check the timing. I have a copy of the repair manual and it gives instructions on checking the timing.
Clarkey

Check to see if the exhaust is blocked?

Peter
Logged

Beta Spyder S2 pre F/L 1600
Beta HPE S2 pre F/L 1600
DavidLaver
Permanent resident
**
Posts: 4387



« Reply #198 on: 23 April, 2015, 08:18:59 AM »


A compression tester isn't expensive:

http://www.amazon.co.uk/s/ref=nb_sb_noss_1?url=search-alias%3Daps&field-keywords=compression%20tester&sprefix=compression+te%2Caps
Logged

David Laver, Lewisham.
lancialulu
Press Officer
Permanent resident
*****
Posts: 5050



« Reply #199 on: 23 April, 2015, 09:15:16 AM »

Hi
I checked the leads yesterday no probs there, next thing is the timing and possibly if I can find it a compression test. There seems to be no suck at all ..I'm wondering if a couple of valves are stuck open or burnt out. Even after a lot of cranking with the cold start device on the spark plugs are bone dry. I will pop the exhaust valve cover off and see what is going on and check the timing. I have a copy of the repair manual and it gives instructions on checking the timing.
Clarkey
Ahh you didnt me low compression, just NO compression (on all 4 cylinders would be odd/ totally knackered engine?)
Logged

Its not the winning but taking part! or is it taking apart?
Lancias:
1955 Aurelia B12
1967 Fulvia 1.3HFR
1972 Fulvia 1600HF
1972 Fulvia Sport 1600
1983 HPE VX
1988 Delta 1.6GTie
1998 Zeta 21.  12v
lancianut666
Permanent resident
**
Posts: 1781


Slow but rough


« Reply #200 on: 23 April, 2015, 12:12:31 PM »

I seem to remember the plugs that came out being OK normal colour etc so I'm assuming it was running when taken out of the previous car back in the late 70's. I observed the valves on inlet and exhaust moving OK and I checked the timing but had great probs spotting the O on the flywheel tooth... not convinced it was right but with it on the mark no 4 valves were both shut and the rotor arm was pointing at no4 spark plug lead. I need to make a lead so I can crank the engine from under the bonnet so I can see what is going on. I think if the engine was totalled it would blow oil and stuff back into the crankcase . Off to do a bit of paying work now will try and have another look later and I need to buy a compression tester with a long pipe.
Clarkey
ps thanks to you all for the tips and advice
Logged

Fulvia Coupe S2 Flavia Coupe 1967 1.8 Kugelfischer Prisma 1.6 carb Y10 Fila Y10 Touring Dedra 1.8 Dedra 2.0 Turbo Appia S1
DavidLaver
Permanent resident
**
Posts: 4387



« Reply #201 on: 23 April, 2015, 01:24:19 PM »


I mentioned to Jason Kennedy I was thinking of having a starter button under the bonnet of my Fiat instead of a hot wire, and he showed me the one he'd installed, permanently, on his.

Perhaps the half way house is a harness with an inline switch and a bracket that can be "installed" and "later" removed but is safe and secure enough for prolonged faff and testing. 

If impatient to test suck and blow can you reach a plug hole with a thumb?

David
Logged

David Laver, Lewisham.
lancianut666
Permanent resident
**
Posts: 1781


Slow but rough


« Reply #202 on: 23 April, 2015, 04:36:53 PM »

Hi David
nope is the answer.. have to do some more paying work tonight and tomorrow so I will get a compression tester first then have another go, my son might be over at the weekend so I will have an assistant.
Clarkey
Logged

Fulvia Coupe S2 Flavia Coupe 1967 1.8 Kugelfischer Prisma 1.6 carb Y10 Fila Y10 Touring Dedra 1.8 Dedra 2.0 Turbo Appia S1
nistri
Megaposter
*
Posts: 564


« Reply #203 on: 24 April, 2015, 06:35:52 AM »

Rather than using very long finger to reach the plug hole for TDC, this is an inexpensive alternative:
http://www.amazon.co.uk/Innovative-Products-America-IPA7894-Compression/dp/B000TQ16HG/ref=sr_1_1?ie=UTF8&qid=1429857270&sr=8-1&keywords=TDC+whistle

Andrea
Logged

Andrea Nistri

Ardea S2
Appia S2
Fulvia GTE
Fulvia Sport 1.3 S
Fulvia Montecarlo
Fulvia Coupe 1.3 S
lancianut666
Permanent resident
**
Posts: 1781


Slow but rough


« Reply #204 on: 24 April, 2015, 08:10:29 AM »

That looks like a must have...was thinking about the no suck problem and it occurred to me that the carb had been fastened on with a lot of green goo so it looks like there was a sealing problem in this area on the manifold so I might take the carb off (again!) and try and level off the manifold..any thoughts on this?
Clarkey
Logged

Fulvia Coupe S2 Flavia Coupe 1967 1.8 Kugelfischer Prisma 1.6 carb Y10 Fila Y10 Touring Dedra 1.8 Dedra 2.0 Turbo Appia S1
simonandjuliet
Permanent resident
**
Posts: 2557



« Reply #205 on: 27 April, 2015, 06:01:34 AM »

Are you sure that you have petrol going to the cylindres ? Worth a squirt of easy start to see if she will fire ?
Good luck
Logged

AmilcarCGS, ApriliaCabrio,S2Aprilia, 2xArdea c'cino,S4 Ardea, Appia c'cino, Appia f'cino,B20s4,R4 Sinpar, R4 Rodeo, 65 Moke, 3xR60 Tractor, 2xToselli 78, Moto Guzzi Ercole,LR Defender, Mini ALL4 JCW, Moto Guzzi Cardellino, Fulvia GT, RE Himalayan
lancianut666
Permanent resident
**
Posts: 1781


Slow but rough


« Reply #206 on: 27 April, 2015, 03:18:30 PM »

Mind reader... tried some Bradex stuff down the carb .. still didn't start... Matron thought it was trying as the cranking speed increased and you can hear the exhaust (just a pipe from the manifold no silencer) popping a bit, it feels like it is on one cylinder ... thing is the plugs are bone dry even after all that cranking I would expect them to be soaked in petrol. I rejetted the carb and swapped out the choke tube to the right size but I can't figure out what the cold start device is for as it ain't getting any extra petrol in there. I have tried squirting neat petrol into the carb but it all drains out the bottom of the inlet manifold hmm... I fear for the starter motor. will sleep on it and have a look tomorrow.
Clarkey
Logged

Fulvia Coupe S2 Flavia Coupe 1967 1.8 Kugelfischer Prisma 1.6 carb Y10 Fila Y10 Touring Dedra 1.8 Dedra 2.0 Turbo Appia S1
peteracs
Administrator
Rebel Poster
*****
Posts: 916



« Reply #207 on: 27 April, 2015, 04:38:41 PM »

Hi

Sorry, no idea on the configuration of the carb/inlet manifold on the Appia so this may be a nonsense comment, but 'leaking out the bottom of the inlet manifold' sounds a pretty fundamental problem with bad gasket?

Peter
Logged

Beta Spyder S2 pre F/L 1600
Beta HPE S2 pre F/L 1600
lancianut666
Permanent resident
**
Posts: 1781


Slow but rough


« Reply #208 on: 28 April, 2015, 09:56:02 AM »

Hi
seems part of the manifold design is a drain for excess petrol, it is a roughly 2mm internal diameter pipe that sticks out of the bottom of the manifold
Clarkey
Logged

Fulvia Coupe S2 Flavia Coupe 1967 1.8 Kugelfischer Prisma 1.6 carb Y10 Fila Y10 Touring Dedra 1.8 Dedra 2.0 Turbo Appia S1
neil-yaj396
Committee
Permanent resident
*****
Posts: 1268



« Reply #209 on: 28 April, 2015, 10:09:08 AM »

If it won't 'run' on Bradex then I don't think there can be any compression.

For a couple of years I made the mistake of laying up my old Frogeye Sprite without starting it for the whole winter. I then used to resurrect it with Bradex. Bradex ignites on compression I think, and the old A Series always used to merrily run with that strange popping sound until you stopped squirting.

It sounds like your timing is totally out, ie valves open on the compression stroke, otherwise the Bradex should fire the engine even in the total absence of fuel?
Logged

1979 1300 Beta Coupe, 2014 Ypsilon 1.2 S Series Momo
Pages: 1 ... 9 10 11 12 13 [14] 15 16 17 18 19 ... 54   Go Up
  Print  
 
Jump to:  

Contact the Forum Administrator

LMC Forum copyright © 2007 - 2021 Lancia Motor Club Ltd

Powered by SMF 1.1.20 | SMF © 2006-2011, Simple Machines
Page created in 0.073 seconds with 21 queries.