Lancia Motor Club Forum Banner
29 March, 2024, 03:35:20 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Need to contact the Forum Administrator? e-mail forum.admin@lanciamc.co.uk, for Database Administrator e-mail database.admin@lanciamc.co.uk      -      Copy deadline for Viva Lancia is 12th of each month.      -      For Events e-mail events@lanciamc.co.uk      -      To Join the club go to http://www.lanciamc.co.uk/join.htm
 
   Home   Help Search Calendar Register  
Pages: [1]   Go Down
  Print  
Author Topic: Cracked Cyl Head  (Read 3249 times)
0 Members and 1 Guest are viewing this topic.
Kevin MacBride
Lapsed
Megaposter
*
Posts: 451



« on: 28 October, 2013, 09:11:34 PM »

Just a query. A friend was on to me today, he has an Aprilia with what he suspects is a cracked head. Would anyone know of someone familiar with this type of problem. Is it something that would be an issue with Aprilias.
Logged

B20 4th series (having a 'facelift')

2000 sedan
Fiat Multipla
Fiat Cinquecento
simonandjuliet
Permanent resident
**
Posts: 2538



« Reply #1 on: 29 October, 2013, 06:29:14 PM »

I am not aware of it being a particular problem - the usual problem is the central bolt which rots at the base and leaves little or no surface to clamp down on. If it really is a cracked head , there are spares available
Logged

AmilcarCGS, ApriliaCabrio,S2Aprilia,Ardea c'cino,S4 Ardea, Appia c'cino, Appia f'cino,B20 s4,4 R4 Sinpar, R4 Rodeo, 65 Moke, 2xR60 Tractor, 2xToselli 78, Moto Guzzi Ercole, Disco 3, Mini ALL4 JCW, Moto Guzzi Cardellino, Fulvia GT, RE Himalayan, Ypsilon
ben
Lapsed
Megaposter
*
Posts: 456


« Reply #2 on: 30 October, 2013, 06:34:53 AM »

   As Simon say's Aprilia cyl. heads are not  normally prone to cracking.
   If Symptoms like water contamination in the oil or water leakage from the head-gasket area occur it is almost certainly due to internal corrosion of the alloy block.
   If the land around the centre stud has been eaten away due to such corrosion Ken Couzens has a special annular milling cutter that can be used to create a flat land below the original head surface so that an alloy spacer can be fitted to enable the centre stud to be tightened in the normal way without straining the head. Using this cutter means that the  head studs do not need to be disturbed. They are very difficult if not impossible to remove without shearing off as they go very deeply into the alloy block.
Logged
Kevin MacBride
Lapsed
Megaposter
*
Posts: 451



« Reply #3 on: 31 October, 2013, 12:43:33 AM »

Thanks for the replies, I'll pass on the information.
Logged

B20 4th series (having a 'facelift')

2000 sedan
Fiat Multipla
Fiat Cinquecento
Pages: [1]   Go Up
  Print  
 
Jump to:  

Contact the Forum Administrator

LMC Forum copyright © 2007 - 2021 Lancia Motor Club Ltd

Powered by SMF 1.1.20 | SMF © 2006-2011, Simple Machines
Page created in 0.054 seconds with 21 queries.