Lancia Motor Club Forum Banner
22 August, 2019, 02:43:08 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Search Calendar Register  
Pages: [1]   Go Down
  Print  
Author Topic: S1 Fulvia Radiator.  (Read 1020 times)
0 Members and 1 Guest are viewing this topic.
Dilambdaman
Permanent resident
**
Offline Offline

Posts: 1317



« on: 06 June, 2013, 09:28:29 PM »

Looking for a radiator for  S1 Fulvia 1600 Fanalone.

Robin.
Logged

Robin Lacey 3222

1932 Dilambda
1969 Fulvia S1 1.6HF Fanalone
Neil
Rebel Poster
*
Offline Offline

Posts: 876



« Reply #1 on: 06 June, 2013, 09:56:16 PM »

Robin, already? Can it be repaired.
Logged

Neil   
386

1973 Fulvia S2 1.3
Dilambdaman
Permanent resident
**
Offline Offline

Posts: 1317



« Reply #2 on: 06 June, 2013, 10:59:57 PM »

Problem is that the radiator that's been in the car since we've owned it is not the right one, it's too tall and doesn't allow the bonnet to close completely. Reducing the height of it is expensive and a replacement seems like a better option.

Robin.
Logged

Robin Lacey 3222

1932 Dilambda
1969 Fulvia S1 1.6HF Fanalone
DavidLaver
Permanent resident
**
Offline Offline

Posts: 3863



« Reply #3 on: 07 June, 2013, 07:59:06 AM »


Here's the thread from December on bonnet fit.

http://www.lancia.myzen.co.uk/forum/index.php?topic=5639.0
Logged

David Laver, Lewisham.
JohnMillham
Rebel Poster
*
Offline Offline

Posts: 915



« Reply #4 on: 07 June, 2013, 08:22:42 AM »

Problem is that the radiator that's been in the car since we've owned it is not the right one, it's too tall and doesn't allow the bonnet to close completely. Reducing the height of it is expensive and a replacement seems like a better option.

Robin.
Having a new one made from aluminium might be the best answer. I'm having one made for the Kurtis and it isn't expensive. Apart from weighing rather less, they are more efficient at cooling. I have one on the Augusta, which looks like the original and cost less than 300.
 Regards, John
Logged
DavidLaver
Permanent resident
**
Offline Offline

Posts: 3863



« Reply #5 on: 07 June, 2013, 09:10:10 AM »


http://www.aaronradiator.co.uk/

At Crystal Palace on their stand they had an aluminium rad painted black for an historic racer.

David
Logged

David Laver, Lewisham.
angelorange
Megaposter
*
Offline Offline

Posts: 317



WWW
« Reply #6 on: 28 August, 2013, 10:12:28 AM »

James at alloy racing fabrications has made many parts for Fulvias from exact replica of the heater matrix to specialist rads and petrol and oil tanks.

He is one of the best ally welders in the UK and is approved to make tanks for aerobatic aircraft like the Pitts special.

Otherwise I have an original s1 rad as a backup for race car.
Logged

I'm entitled to my ignorance!
DavidLaver
Permanent resident
**
Offline Offline

Posts: 3863



« Reply #7 on: 28 August, 2013, 10:56:02 AM »

http://www.alloyracingfabrications.com/

Looking at generic fuel tanks very good value.

David
Logged

David Laver, Lewisham.
Richard Fridd
Permanent resident
**
Offline Offline

Posts: 2839



« Reply #8 on: 28 August, 2013, 12:11:49 PM »

Local to here is 'Brise Fabrications' at Dartford, who do a good job also.
Logged

Richard Nevison Fridd
Pages: [1]   Go Up
  Print  
 
Jump to:  

Contact the Forum Administrator

LMC Forum copyright © 2007 - 2018 Lancia Motor Club Ltd

Powered by SMF 1.1.20 | SMF © 2006-2011, Simple Machines