Lancia Motor Club Forum Banner
29 March, 2024, 06:29:27 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Need to contact the Forum Administrator? e-mail forum.admin@lanciamc.co.uk, for Database Administrator e-mail database.admin@lanciamc.co.uk      -      Copy deadline for Viva Lancia is 12th of each month.      -      For Events e-mail events@lanciamc.co.uk      -      To Join the club go to http://www.lanciamc.co.uk/join.htm
 
   Home   Help Search Calendar Register  
Pages: [1]   Go Down
  Print  
Author Topic: HELP!!!!  (Read 3914 times)
0 Members and 1 Guest are viewing this topic.
Angle Grinder
Megaposter
*
Posts: 426



WWW
« on: 19 June, 2013, 11:03:34 AM »

1967 Flavia Coupe 1.8

I've been getting my Slave Cylinder rebuilt and we've hit a problem and require a replacement piston for the part shown in the attached picture?

Can anyone sell me this part or even sell me a complete slave cylinder that is in need of a rebuild?

When rebuilding the cylinder we were working with a workshop manual and it suggested that the seal for the rear braking system piston sould be the same as the one for the front piston (seal 7 in the kit). My machine shop chum worked to the manual and machined the piston to take the seal supplied in the kit, but this has resulted in the rear brakes coming on with a sharpness that causes them to lock up at a touch of the pedal.

So I need an original piston to allow us to rebuild the brakes in the same manner as they came apart. Yeah, I know, don't ask. He's a nice guy and thought he was doing me a favour! Roll Eyes

P.S. I need to get the car back together before the 5th July as a friend wants to use it as a wedding car!!!  Undecided

* Servo Part.doc (207.5 KB - downloaded 203 times.)
« Last Edit: 19 June, 2013, 11:10:30 AM by Angle Grinder » Logged

Current Cars: 1994 2.0 VIS Thema Station Wagon, 1967 Flavia 1.8 PF Coupe.

Previous cars:
1983 Prisma 1600
1991 Thema 16v i.e. SE
1988 Thema 8v Turbo
1992 Thema 16v i.e.
1983 Gamma Coupe (manual)
1993 Thema VIS
1994 Thema VIS LE
1990 Thema 2.8
phil-m
Lapsed
Senior Member
*****
Posts: 173


« Reply #1 on: 19 June, 2013, 08:51:43 PM »

Hi, whilst I cannot help with the part Sad Would you mind saying where did you get the seal kit from? as I need to rebuild my servo as fluid is leaking into the engine

Thanks,
Logged
lancialulu
Press Officer
Permanent resident
*****
Posts: 4902



« Reply #2 on: 20 June, 2013, 07:36:46 AM »

If out of luck you could use the replacement slave system supplied by the consortium en block.

What is wrong with the part??

Tim
Logged

Its not the winning but taking part! or is it taking apart?
Lancias:
1955 Aurelia B12
1967 Fulvia 1.3HFR
1972 Fulvia 1600HF
1972 Fulvia Sport 1600
1983 HPE VX
1988 Delta 1.6GTie
1998 Zeta 21.  12v
Angle Grinder
Megaposter
*
Posts: 426



WWW
« Reply #3 on: 20 June, 2013, 01:30:43 PM »

The seal kit was obtained from the Flavia Consortium... you have to join this if you are going to run a Flavia. It's worth every penny of the membership fee!

The problem is that the workshop manual shows the seal on the actuating piston for the rear brakes to be the same as the one for the front brake piston. I gave the workshop manual and the seal kit to my friendly mechanic as I thought my cylinder might need his tooling expertise to polish the insides smooth (as it turns out the bore was really quite good). My friendly mechanic found the the piston for the rear brakes would not accept the supplied seal so he took the slightly unusual solution of machining the piston to fit the seal. This worked fine, but the new seal has resulted in the rear brakes coming on before the front ones and this is not a nice characteristic when entering a bend. It seems that the piston original had a more flexible seal and this resulted in the rear brakes applying after the front ones were biting (a much better set up!).
Logged

Current Cars: 1994 2.0 VIS Thema Station Wagon, 1967 Flavia 1.8 PF Coupe.

Previous cars:
1983 Prisma 1600
1991 Thema 16v i.e. SE
1988 Thema 8v Turbo
1992 Thema 16v i.e.
1983 Gamma Coupe (manual)
1993 Thema VIS
1994 Thema VIS LE
1990 Thema 2.8
lancialulu
Press Officer
Permanent resident
*****
Posts: 4902



« Reply #4 on: 20 June, 2013, 04:03:32 PM »

Consortium must a have an old slave as they sell new alternatives with servo.....
Logged

Its not the winning but taking part! or is it taking apart?
Lancias:
1955 Aurelia B12
1967 Fulvia 1.3HFR
1972 Fulvia 1600HF
1972 Fulvia Sport 1600
1983 HPE VX
1988 Delta 1.6GTie
1998 Zeta 21.  12v
phil-m
Lapsed
Senior Member
*****
Posts: 173


« Reply #5 on: 20 June, 2013, 07:28:38 PM »

The consortium are all out of new servo's which is originally from Frenos Ireunos in Spain. I will see if they have a full seal kit though. What sort of seal is that is needed? is it a lip seal or a slipper seal (lip seal with an o-ring to energise it)?
Logged
Angle Grinder
Megaposter
*
Posts: 426



WWW
« Reply #6 on: 20 June, 2013, 07:32:12 PM »

Colin is already on the case, and knows he has what I need just hasn't located it yet.

The workshop shows it as seal 7 in the diagram, but the one that came off the piston was a seal of type 9 according to the workshop diagram. It shouldn't be too hard to find a replacement as it looks to be a fairly standard O ring.
Logged

Current Cars: 1994 2.0 VIS Thema Station Wagon, 1967 Flavia 1.8 PF Coupe.

Previous cars:
1983 Prisma 1600
1991 Thema 16v i.e. SE
1988 Thema 8v Turbo
1992 Thema 16v i.e.
1983 Gamma Coupe (manual)
1993 Thema VIS
1994 Thema VIS LE
1990 Thema 2.8
phil-m
Lapsed
Senior Member
*****
Posts: 173


« Reply #7 on: 20 June, 2013, 09:30:53 PM »

If it is an O-ring, if you have the bore and groove diameters along with the groove width I can let you know the exact spec, material and size and probably find one for you gratis!
Logged
DavidLaver
Permanent resident
**
Posts: 4365



« Reply #8 on: 20 June, 2013, 10:33:44 PM »


The new servo is imported by S-V-C and out of stock.  On their home page its under "servos" rather than "brake parts".

http://www.s-v-c.co.uk/product/dual-remote-servo/

My servo is off the car and its the "plan B" to get to the church on time.

David
Logged

David Laver, Lewisham.
Pages: [1]   Go Up
  Print  
 
Jump to:  

Contact the Forum Administrator

LMC Forum copyright © 2007 - 2021 Lancia Motor Club Ltd

Powered by SMF 1.1.20 | SMF © 2006-2011, Simple Machines
Page created in 0.057 seconds with 21 queries.