Lancia Motor Club Forum Banner
14 December, 2019, 02:01:04 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Search Calendar Register  
Pages: [1]   Go Down
  Print  
Author Topic: Brakes  (Read 323 times)
0 Members and 1 Guest are viewing this topic.
BlueKSO
Member
***
Offline Offline

Posts: 26


« on: 02 August, 2018, 08:00:51 PM »

I seem unable to bleed the rear brakes on my 63 Flavia Coupe.

Using both pistons on the reservoir of the master cylinder, I can bleed both bleed nipples on the slave cylinder.  The front piston then bleeds the front brakes successfully, but the back piston is solid, will not push down and will not bleed out the rear brakes.
The rear flexible hose has been replaced as it had partially collapsed.  Before I connected up the flexible hose I tried to bleed through with no joy.  Both rear calliper bleed nipples are clear.  There seems to be some malfunction with the servo/slave cylinder. 

Any clues would be much appreciated.

Cheers,  Peter

Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  

Contact the Forum Administrator

LMC Forum copyright © 2007 - 2018 Lancia Motor Club Ltd

Powered by SMF 1.1.20 | SMF © 2006-2011, Simple Machines