Lancia Motor Club Forum Banner
29 March, 2024, 02:56:00 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Need to contact the Forum Administrator? e-mail forum.admin@lanciamc.co.uk, for Database Administrator e-mail database.admin@lanciamc.co.uk      -      Copy deadline for Viva Lancia is 12th of each month.      -      For Events e-mail events@lanciamc.co.uk      -      To Join the club go to http://www.lanciamc.co.uk/join.htm
 
   Home   Help Search Calendar Register  
Pages: [1] 2   Go Down
  Print  
Author Topic: News from Poland  (Read 10001 times)
0 Members and 1 Guest are viewing this topic.
MaciekPeda
Member
***
Posts: 40



WWW
« on: 05 June, 2013, 05:51:03 PM »

Hi everyone !

Last i was found those crazy links (hangers) between rear spring and control arms in good condition (thanks Ron !) Now they are cleaned and rich greased - see attached picture.
I was too finish rear shocks rebuild - i think, that now i have everything ready for both suspensions.

Kindly regards from rainy Poland


* Hangers.jpg (212.4 KB, 1740x2113 - viewed 450 times.)

* Andre-shocks.jpg (394.96 KB, 2000x2103 - viewed 684 times.)
Logged

Maciek Peda
Poland
Lancia Aprilia Trasformabile 1940
Bugatti T40 Semiracer 1928
Maserati 3500 GT Iniezione 1963
davidwheeler
Permanent resident
**
Posts: 1470



« Reply #1 on: 11 June, 2013, 12:54:23 PM »

There is information about Andre Telecontrol shock absorbers on the Technical Information thread.    Working fluid is the same as in your radiator!
Logged

David Wheeler.  Lambdas, Aprilia, Fulvia Sport.(formerly Appia and Thema as well).
simonandjuliet
Permanent resident
**
Posts: 2538



« Reply #2 on: 11 June, 2013, 07:16:13 PM »

Looks great - you are right to get decent wires, if they break it can be a real problem -  it has been known to flip the car !
Logged

AmilcarCGS, ApriliaCabrio,S2Aprilia,Ardea c'cino,S4 Ardea, Appia c'cino, Appia f'cino,B20 s4,4 R4 Sinpar, R4 Rodeo, 65 Moke, 2xR60 Tractor, 2xToselli 78, Moto Guzzi Ercole, Disco 3, Mini ALL4 JCW, Moto Guzzi Cardellino, Fulvia GT, RE Himalayan, Ypsilon
MaciekPeda
Member
***
Posts: 40



WWW
« Reply #3 on: 19 June, 2013, 07:36:50 PM »

Hi !
Thank you for any comments and advices.
I still look for a original Andre pressure gauge for my Telecontrol system - any idea where can i find such one gauge ? Maybe someone from yours had such one item ?

Regards
Logged

Maciek Peda
Poland
Lancia Aprilia Trasformabile 1940
Bugatti T40 Semiracer 1928
Maserati 3500 GT Iniezione 1963
Sliding Pillar
Permanent resident
**
Posts: 1702



« Reply #4 on: 21 June, 2013, 09:19:38 AM »

You could try:

Vintage & Classic Shock Absorbers Ltd
203 Sanderstead Road
South Croydon
Surrey
CR2 0PN
Contact:   Graham Brown
Telephone:   0044 20 8651 5347

They supply parts for Hartford dampers, not sure if the have the gauges though.

Logged

1955 Aurelia
1961 Lamborghini
MaciekPeda
Member
***
Posts: 40



WWW
« Reply #5 on: 21 June, 2013, 06:31:06 PM »

Thank you

I will try Smiley

Regards
Logged

Maciek Peda
Poland
Lancia Aprilia Trasformabile 1940
Bugatti T40 Semiracer 1928
Maserati 3500 GT Iniezione 1963
MaciekPeda
Member
***
Posts: 40



WWW
« Reply #6 on: 07 July, 2013, 06:04:05 PM »

Hi !
This weekend i was perform last test of my Aprilia engine, this time with repaired radiator and filled with modern coolant.
Fortunately, everything is leak free, included  restored by myself water pump. Engine was run over one hour and reached max temperature at the water outlet from head 78 Celsius in a hot day (thanks to three blade ventilator), so i can now stored engine; paint radiator and prepare other parts.

I have a question - my carburetor, Zenith 32 VIML is in poor condition, although looks and works still good, he is badly internal corroded. Has anyone spare carburetor for sale ? Can be only both castings - main body and fuel bowl ?

Regards from Poland

Maciek


* Aprilia-test1.jpg (175.79 KB, 1200x1176 - viewed 526 times.)

* Aprilia-test2.jpg (164.36 KB, 1200x1224 - viewed 520 times.)

* Aprilia-carb.jpg (195.18 KB, 1200x1965 - viewed 569 times.)
Logged

Maciek Peda
Poland
Lancia Aprilia Trasformabile 1940
Bugatti T40 Semiracer 1928
Maserati 3500 GT Iniezione 1963
DavidLaver
Permanent resident
**
Posts: 4365



« Reply #7 on: 07 July, 2013, 11:34:57 PM »


Congratulations!!

Some tests from YouTube.

http://www.youtube.com/watch?v=KIUAM28vsI0
http://www.youtube.com/watch?v=1e1xW82nrIQ
http://www.youtube.com/watch?v=8l69fyX3El0

David
Logged

David Laver, Lewisham.
MaciekPeda
Member
***
Posts: 40



WWW
« Reply #8 on: 25 October, 2013, 10:24:20 PM »

Hello!

Here in Poland we have some Lancia news:
- I was remanufacture inserts from grille - original ones was heavly damaged
- I was restored at Pamela David Enamels my Lancia badge from grille - now look amazing !
- I was found finally Telecontrol gauge - Sliding Pillar - thanks for a contact to Vintage & Classic Shock Absorbers Ltd
- I was bought directly in Italy new Metron temp gauge - is better to knew, how hot is engine Smiley

Below some pictures.

Kindly regards from surprisingly Poland

Maciek


* Inserts-from-grille.jpg (471.39 KB, 1481x1600 - viewed 465 times.)

* Grille.jpg (345.61 KB, 1141x1600 - viewed 412 times.)

* Lancia_Badge.jpg (326.88 KB, 1600x1145 - viewed 453 times.)

* Telecontrol-gauge.jpg (300.25 KB, 1600x1518 - viewed 443 times.)

* Metron-temp-gauge.jpg (190.45 KB, 1600x1259 - viewed 501 times.)
Logged

Maciek Peda
Poland
Lancia Aprilia Trasformabile 1940
Bugatti T40 Semiracer 1928
Maserati 3500 GT Iniezione 1963
simonandjuliet
Permanent resident
**
Posts: 2538



« Reply #9 on: 26 October, 2013, 06:13:12 PM »

All looks excellent, the grill will be lovely once it is all re-chromed.

Looking at your earlier pictures has shown how I can grease my wire hangers. Colin sent me some greasers which although too big for the centre bearing will work on the hanger if I do as you have done .

A longer nut with Colin's greaser screwed on top - Great idea !

(The joys of sharing pictures and ideas !!)
Logged

AmilcarCGS, ApriliaCabrio,S2Aprilia,Ardea c'cino,S4 Ardea, Appia c'cino, Appia f'cino,B20 s4,4 R4 Sinpar, R4 Rodeo, 65 Moke, 2xR60 Tractor, 2xToselli 78, Moto Guzzi Ercole, Disco 3, Mini ALL4 JCW, Moto Guzzi Cardellino, Fulvia GT, RE Himalayan, Ypsilon
MaciekPeda
Member
***
Posts: 40



WWW
« Reply #10 on: 26 October, 2013, 08:34:44 PM »

Looking at your earlier pictures has shown how I can grease my wire hangers. Colin sent me some greasers which although too big for the centre bearing will work on the hanger if I do as you have done .
This is a only idea to proper grease wire hangers. Factory way with unscrew nuts etc is very odd... I was put everywhere in my Aprilia greasers with same size to make further maintain more easy. I have a large collection of Tecalemit greasers at home Smiley)

Regards
Maciek
Logged

Maciek Peda
Poland
Lancia Aprilia Trasformabile 1940
Bugatti T40 Semiracer 1928
Maserati 3500 GT Iniezione 1963
simonandjuliet
Permanent resident
**
Posts: 2538



« Reply #11 on: 27 October, 2013, 02:36:45 PM »

Certainly , later Aprilias had greasers on the bolts as you can see in the (very dirty) pictures. You have come up with an elegant alternative to it !

I am missing one of the proper greasers and have not found one yet ......


* DSCN3639.jpg (59.37 KB, 514x640 - viewed 978 times.)

* DSCN3637.jpg (54.39 KB, 640x480 - viewed 1024 times.)
Logged

AmilcarCGS, ApriliaCabrio,S2Aprilia,Ardea c'cino,S4 Ardea, Appia c'cino, Appia f'cino,B20 s4,4 R4 Sinpar, R4 Rodeo, 65 Moke, 2xR60 Tractor, 2xToselli 78, Moto Guzzi Ercole, Disco 3, Mini ALL4 JCW, Moto Guzzi Cardellino, Fulvia GT, RE Himalayan, Ypsilon
MaciekPeda
Member
***
Posts: 40



WWW
« Reply #12 on: 27 October, 2013, 04:40:09 PM »

Maybe i can help - i have a lot of such one greasers - give me thread and i will look.
Logged

Maciek Peda
Poland
Lancia Aprilia Trasformabile 1940
Bugatti T40 Semiracer 1928
Maserati 3500 GT Iniezione 1963
MaciekPeda
Member
***
Posts: 40



WWW
« Reply #13 on: 16 November, 2013, 11:24:01 AM »

Hello,

Works at my Aprilia slowly goes further.
Last i was put together clutch, mount gearbox to engine and i was finished leaf springs for engine suspension. In meantime i was restored too steering wheel and clean all info plates from engine bay. See pictures, please.
Best regards from Poland


* Engine suspension.jpg (237.97 KB, 2200x1650 - viewed 455 times.)

* Engine and gearbox.jpg (227.7 KB, 2000x1500 - viewed 770 times.)

* Aprilia-steering-wheel-complete-1.jpg (375.91 KB, 2000x1955 - viewed 460 times.)

* Plates.jpg (447.96 KB, 2500x2007 - viewed 515 times.)
Logged

Maciek Peda
Poland
Lancia Aprilia Trasformabile 1940
Bugatti T40 Semiracer 1928
Maserati 3500 GT Iniezione 1963
Sliding Pillar
Permanent resident
**
Posts: 1702



« Reply #14 on: 16 November, 2013, 06:20:21 PM »

Good to hear you managed to get the tele control gauge. The engine plates look great. Have you got the link rod from the clutch arm to the oil filter? The rocker cover looks very clean polished up, but originally it would have been painted black..... a difficult choice!!
Best wishes. Ade.
Logged

1955 Aurelia
1961 Lamborghini
Pages: [1] 2   Go Up
  Print  
 
Jump to:  

Contact the Forum Administrator

LMC Forum copyright © 2007 - 2021 Lancia Motor Club Ltd

Powered by SMF 1.1.20 | SMF © 2006-2011, Simple Machines
Page created in 0.06 seconds with 21 queries.