Lancia Motor Club Forum Banner
10 December, 2024, 12:52:39 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Need to contact the Forum Administrator? e-mail forum.admin@lanciamc.co.uk     -      Copy deadline for Viva Lancia is 12th of each month.      -      For Events e-mail events@lanciamc.co.uk      -      To Join the club go to http://www.lanciamc.co.uk/join.htm
 
   Home   Help Search Calendar Register  
Pages: [1]   Go Down
  Print  
Author Topic: Dynamo/Alternator  (Read 5145 times)
0 Members and 1 Guest are viewing this topic.
Dave Gee
Megaposter
*
Posts: 225


« on: 04 May, 2013, 08:57:58 AM »

To get the best of both worlds, I have just had my dynamo made into an alternator for an early S1 Fulvia. Picture attached. There is a possibility of getting a batch made.


* Fulvia Early.JPG (582.15 KB, 2816x2112 - viewed 419 times.)
Logged
fay66
Permanent resident
**
Posts: 6233



« Reply #1 on: 04 May, 2013, 11:57:37 PM »

To get the best of both worlds, I have just had my dynamo made into an alternator for an early S1 Fulvia. Picture attached. There is a possibility of getting a batch made.

Dave, it looks excellent, any idea what it would cost if you have a batch made please Huh?

Brian
8227 Cool
Logged

Own 1966 Fulvia 2C Berlina since 1997, back on road 11-1999.Known as "Fay"
2006 Renault Megane 1 5 Dci Sports Tourer
Dedra Technical Adviser
davidwheeler
Permanent resident
**
Posts: 1485



« Reply #2 on: 05 May, 2013, 02:54:50 PM »

Would it not be easier to fit one off a 2CV?!   Seriously, as it is well hidden by the inlet manifold, why not just fit a more modern alternator - it is easy enough to change the pulley for a V type?
Logged

David Wheeler.  Lambdas, Aprilia, Fulvia Sport.(formerly Appia and Thema as well).
roddy
Senior Member
*****
Posts: 188


« Reply #3 on: 05 May, 2013, 11:04:27 PM »

Hello David

I think the problem using a modern alternator might be finding one with the length of body to take the long single bolt mounting. This mounting is the particular feature of the S1 Fulvia block (long cast on sleeve through which the bolt slides), which is absent from the S2 block with its alternator (cast on lug on block for rear mounting and bolt on plate for front mounting).

Hello Dave

Can I repeat the request from Brian as to price costings.  Also, what other alterations are required to substitute the mechanical Bosch regulator of the S1 dynamo?

Regards - Roddy
Logged

Roddy Young
Dunfermline, Fife

1970 Fulvia Sport S1 1.3S
Richard Fridd
Permanent resident
**
Posts: 3489



« Reply #4 on: 06 May, 2013, 07:53:52 AM »

There is a PDF wiring diagram at http://www.classiclancia.com/car-parts/index.php?route=product/product&product_id=93 also anyone know what this photo is?


* images.jpg (5.09 KB, 186x139 - viewed 651 times.)
Logged

Richard Nevison Fridd                                                                      Happy Lancia, Happy Life
lancialulu
Press Officer
Permanent resident
*****
Posts: 5054



« Reply #5 on: 06 May, 2013, 08:11:03 AM »

These solutions with extended front pulleys must surely excessively load the tiny alternator front bearing with this bending moment, especially as you have to have the belt really tight.....
Logged

Its not the winning but taking part! or is it taking apart?
Lancias:
1955 Aurelia B12
1967 Fulvia 1.3HFR
1972 Fulvia 1600HF
1972 Fulvia Sport 1600
1983 HPE VX
1988 Delta 1.6GTie
1998 Zeta 21.  12v
fay66
Permanent resident
**
Posts: 6233



« Reply #6 on: 06 May, 2013, 08:24:41 AM »

These solutions with extended front pulleys must surely excessively load the tiny alternator front bearing with this bending moment, especially as you have to have the belt really tight.....
Tim, I'm inclined to agree with you and a good reason to stay with Dave's solution of modifying the dynamo with a front bearing which is designed to take the extra load.
I also like the idea of overcoming one potential problem without spoiling the appearance of the series 1 under the bonnet.
Must say though I've never had a problem sticking with the Dynamo on my 1969 1.3 Rallye Coupe, or "Fay" over the last 15 years as long as you didn't try to run everything at once, but with no heated rear window, or Radio there's not a lot else drawing power Smiley

Brian
8227 Cool
Brian
8227 Cool
Logged

Own 1966 Fulvia 2C Berlina since 1997, back on road 11-1999.Known as "Fay"
2006 Renault Megane 1 5 Dci Sports Tourer
Dedra Technical Adviser
chriswgawne
Permanent resident
**
Posts: 2086



« Reply #7 on: 06 May, 2013, 12:29:07 PM »

Yes,
I am with you Brian. Fulvia dynamos have always seemed up to the job and reliable so why change?. Aurelia dynamo's are a bit more marginal (and of course are necessarily older). Various alternator conversions are available (I have tried a couple of them) but really the dynamo is fine if in good condition  as long as no addititional electrical equipment is fitted and all switched on at the same time.
The Aurelia alternator conversions all save weight as well.
Chris
Logged

Chris Gawne
Mobile: 07778 216552
lancialulu
Press Officer
Permanent resident
*****
Posts: 5054



« Reply #8 on: 06 May, 2013, 01:39:12 PM »

I should have said I overhauled my Flavia dynamo as a precaution as it didnt seem to have been touched in the car's 65000 life.

I just needed one exoticly designed huge brush (the other one was less than half worn - but I bought two as you do). It seems to cope and like Brian I have no radio (yet) and no heated rear window....

I like to stay original too.

Tim
Logged

Its not the winning but taking part! or is it taking apart?
Lancias:
1955 Aurelia B12
1967 Fulvia 1.3HFR
1972 Fulvia 1600HF
1972 Fulvia Sport 1600
1983 HPE VX
1988 Delta 1.6GTie
1998 Zeta 21.  12v
Pages: [1]   Go Up
  Print  
 
Jump to:  

Contact the Forum Administrator

LMC Forum copyright © 2007 - 2021 Lancia Motor Club Ltd

Powered by SMF 1.1.20 | SMF © 2006-2011, Simple Machines
Page created in 0.045 seconds with 21 queries.