Lancia Motor Club Forum Banner
14 December, 2019, 12:02:45 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Search Calendar Register  
Pages: [1]   Go Down
  Print  
Author Topic: Y 10 wheel trims  (Read 659 times)
0 Members and 1 Guest are viewing this topic.
frankxhv773t
Permanent resident
**
Offline Offline

Posts: 1531



« on: 04 August, 2012, 05:27:49 PM »

Has anybody got some Y10 wheel trims for steel wheels in reasonable condition. I have never had a matching set ( early type on one side and late type on the other side ). Having recently lost one I think it is time to try and find a matching set. Any help would be very welcome.

Thanks
Frank
Logged
ben
Megaposter
*
Offline Offline

Posts: 456


« Reply #1 on: 07 August, 2012, 04:25:52 PM »

Hi Frank
            I have a pair that are in good condition apart from one of the four little tabs on the back being broken off. I dont know if they are early or late. They have 18 holes near the outside edge and appear to be held on by three of the four wheel set bolts.
             I cannot access my emails at the moment so ring me if you are interested on 01454 322931.
                                             Ben
Logged
frankxhv773t
Permanent resident
**
Offline Offline

Posts: 1531



« Reply #2 on: 05 November, 2012, 10:09:31 PM »

Trims now obtained. I couldn't get through to you Ben so sorry for the lack of response however Murf sorted me out a set and I was able to furnish him with a good Y10 boot badge.

Frank
Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  

Contact the Forum Administrator

LMC Forum copyright © 2007 - 2018 Lancia Motor Club Ltd

Powered by SMF 1.1.20 | SMF © 2006-2011, Simple Machines