Lancia Motor Club Forum Banner
27 February, 2020, 06:15:38 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Search Calendar Register  
Pages: [1]   Go Down
  Print  
Author Topic: Aprilia oil pressure gauge calibration  (Read 1017 times)
0 Members and 1 Guest are viewing this topic.
lancialulu
Press Officer
Permanent resident
*****
Offline Offline

Posts: 3669



« on: 13 June, 2012, 09:39:53 PM »

Just thought I would "calibrate" the oil pressure gauge as I had the dash in pieces while sorting the speedo that broke on the SPR.

Well, the needle didnt start to move until 20psi and the lower end of "Normal" was 35psi and the top end of "normal" was 60psi.

Interestingly the spare gauge I had was completely different with the lower level 25psi and upper was 45psi.

Anyone, know what the oil pressure should be on hot engine at 50mph in 4th???

Tim
Logged

Its not the winning but taking part! or is it taking apart?
1955 Aurelia B12
1967 Flavia Vignale iniezione
1967 Fulvia HFR
1972 1600 HF
1972 1600 Fulvia Sport
1978 Transformer HF3000 Strato's replica
1979 2500 Gamma Coupe
1988 Delta 1.6GTi.e.
simonandjuliet
Permanent resident
**
Offline Offline

Posts: 2032



« Reply #1 on: 14 June, 2012, 07:08:17 PM »

Sorry , can't answer your question re oil pressure when hot, but am interested to know how you calibrated the pressure gauge .....

Also how did you break the winder, normal use or accident ? I wonder if our SA friend may be keen to remake some of these as well.



ps my speedo cable was remade at speedycables - however you probably have already got that lined up
Logged

S1 Aprilia Cabrio, S2 Aprilia, S1 Promiscuo,S2 camioncino, S2 furgoncino, S3 Appia, R4 Sinpar, R4 Rodeo, R60 Tractor, Moto Guzzi Ercole, Disco 3, Mini ALL4 JCW, Moto Guzzi Cardellino 73,Fulvia Berlina GT, Fulvia Rallye S, Fulvia 1600 HF,
St Volumex
Lapsed
Rebel Poster
*
Offline Offline

Posts: 613


Owner of RetroPart


WWW
« Reply #2 on: 14 June, 2012, 08:50:28 PM »


Also how did you break the winder, normal use or accident ? I wonder if our SA friend may be keen to remake some of these as well.


I am indeed!
Logged

Guy McDougall
www.facebook.com/RetroPart
Rare Parts for Rare Machines
Appia Coupé S3 (Rosina), Appia Berlina S3 (La Giaconda), Fulvia 1.3S 5 spd coupé (Tigger, belongs to Carol), Beta Spyder S2 (Vivaldi), Montecarlo Spyder S2, HPE VX (Pugsly) etc
lancialulu
Press Officer
Permanent resident
*****
Offline Offline

Posts: 3669



« Reply #3 on: 14 June, 2012, 11:10:41 PM »

Sorry , can't answer your question re oil pressure when hot, but am interested to know how you calibrated the pressure gauge .....

Also how did you break the winder, normal use or accident ? I wonder if our SA friend may be keen to remake some of these as well.



ps my speedo cable was remade at speedycables - however you probably have already got that lined up

Calibrated from my air line that has a regulated gauged supply.

Speedo cable repaired by me. How long it will last is a bit of a guess...

Tim
Logged

Its not the winning but taking part! or is it taking apart?
1955 Aurelia B12
1967 Flavia Vignale iniezione
1967 Fulvia HFR
1972 1600 HF
1972 1600 Fulvia Sport
1978 Transformer HF3000 Strato's replica
1979 2500 Gamma Coupe
1988 Delta 1.6GTi.e.
BlueSky
Lapsed
Senior Member
*****
Offline Offline

Posts: 183



WWW
« Reply #4 on: 15 June, 2012, 06:13:00 AM »

You can just see the oil pressure gauge on the right. The speedo is metric, so doing 80kmh and the engine was nice and hot. Have never tested the gauge so don't know how accurate it is! I've always used Penrite 15W-40 mineral oil since I got the car. On the last long trip, 1900km she used about 200ml.
Noel


* 80kmh oil pres.jpg (157.05 KB, 1024x768 - viewed 161 times.)
Logged

1937 1st series Aprilia Berlina
Nissan X-Trail T31 TS
1920 P & M 3 1/2hp {FOR SALE}
John Deere LX188
www.narrywoolan.com.au/home
Pages: [1]   Go Up
  Print  
 
Jump to:  

Contact the Forum Administrator

LMC Forum copyright © 2007 - 2018 Lancia Motor Club Ltd

Powered by SMF 1.1.20 | SMF © 2006-2011, Simple Machines