Lancia Motor Club Forum Banner
19 September, 2019, 08:08:09 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Search Calendar Register  
Pages: [1]   Go Down
  Print  
Author Topic: Hanging doors  (Read 680 times)
0 Members and 1 Guest are viewing this topic.
welleyes
Member
****
Offline Offline

Posts: 53


« on: 22 April, 2012, 10:38:54 AM »

Our front doors in the Aprilia have dropped and we are about to attack them. Any advice on this? We are more used to vintage cars which either have no doors or have simple hinges that any home handyman could fix. The Aprilia seems disturbingly modern and any tips would be gratefully accepted,

Stuart Tallack pp Andy Tallack
Logged
chugga boom
Non-LMC Seller
Permanent resident
**
Offline Offline

Posts: 1754



« Reply #1 on: 22 April, 2012, 01:34:10 PM »

I'm just in the middle of doing this job myself on my aprilia, behind the trim panel on the A post is a huge Lancia nut that you need to loosen off, when this is loosethe hinge can be rotated to move its position either forwards or backwards to move the position of the door, in the hinge itself there are grubscrews through the socket of the hinge (on the body) to stop the ball end (on the door) popping out, loosen these off 1st and with the door open slightly not fully the door will lift out of the hinge, you lift vertically then pull the door backwards and its off, check where the door hinges attatch to the doors them selves as both my front doors have cracked around the hinges causing them to drop and flex, this is only really visable withe the hinge off the door
Logged

1935 augusta lusso (chugga)
1935 belna saloon
1935 augusta lusso
1938 ardenne
1939 aprilia lusso
1958 appia s2
1963 appia s3 
195? appia camioncino
1972 fulvia 1600HF
1976 fulvia coupe
194? ardea SUV  "THE BEAST!!!"
Pages: [1]   Go Up
  Print  
 
Jump to:  

Contact the Forum Administrator

LMC Forum copyright © 2007 - 2018 Lancia Motor Club Ltd

Powered by SMF 1.1.20 | SMF © 2006-2011, Simple Machines