Lancia Motor Club Forum Banner
09 December, 2024, 01:23:31 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Need to contact the Forum Administrator? e-mail forum.admin@lanciamc.co.uk     -      Copy deadline for Viva Lancia is 12th of each month.      -      For Events e-mail events@lanciamc.co.uk      -      To Join the club go to http://www.lanciamc.co.uk/join.htm
 
   Home   Help Search Calendar Register  
Pages: [1]   Go Down
  Print  
Author Topic: drive shaft grease; How much?  (Read 2692 times)
0 Members and 1 Guest are viewing this topic.
phil-m
Lapsed
Senior Member
*****
Posts: 173


« on: 17 December, 2011, 07:28:17 PM »

Does anyone know how much (in grammes?) grease should be used to repack the inboard & outboard driveshaft joints on a Series 2?
Logged
zagatoboy
Guest
« Reply #1 on: 18 December, 2011, 03:54:48 PM »

If I remember we used to get a small sachet of grease with the cv boot kit when we used to fit them? you don't fill it, make sure you have the joint nicely covered with quite a bit of excess over it and that will do, as long as it doesn't leak out again
Logged
lancialulu
Press Officer
Permanent resident
*****
Posts: 5054



« Reply #2 on: 18 December, 2011, 04:05:05 PM »

I always pack the joint (no rasta jokes...) then put the boot on and release any pneumatic pressure with a smal screw driver up between the shaft and the boot.....

Tim
Logged

Its not the winning but taking part! or is it taking apart?
Lancias:
1955 Aurelia B12
1967 Fulvia 1.3HFR
1972 Fulvia 1600HF
1972 Fulvia Sport 1600
1983 HPE VX
1988 Delta 1.6GTie
1998 Zeta 21.  12v
Pages: [1]   Go Up
  Print  
 
Jump to:  

Contact the Forum Administrator

LMC Forum copyright © 2007 - 2021 Lancia Motor Club Ltd

Powered by SMF 1.1.20 | SMF © 2006-2011, Simple Machines
Page created in 0.042 seconds with 20 queries.