Lancia Motor Club Forum Banner
10 November, 2024, 08:18:38 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Need to contact the Forum Administrator? e-mail forum.admin@lanciamc.co.uk     -      Copy deadline for Viva Lancia is 12th of each month.      -      For Events e-mail events@lanciamc.co.uk      -      To Join the club go to http://www.lanciamc.co.uk/join.htm
 
   Home   Help Search Calendar Register  
Pages: [1]   Go Down
  Print  
Author Topic: Alloy panels  (Read 2839 times)
0 Members and 1 Guest are viewing this topic.
italaincar
Lapsed
Member
*
Posts: 5


« on: 06 August, 2011, 08:34:32 PM »

I am about to start on the long delayed rebuild of my Fulvia, starting with the alloy panels.  Both on the bonnet and boot lid the inside frame has come away from the top, were they welded or stuck together or what?   Any ideas appreciated, I am stripping them down to bare metal and etch priming before getting them re- sprayed.
Logged
ncundy
Lapsed
Rebel Poster
*
Posts: 980



« Reply #1 on: 07 August, 2011, 08:18:48 AM »

They're welded. Find a good body shop that is able to work with aluminium and they will be able to fix it up. Inspect around the hinge fixings for fatigue cracks, and also around the top of the doors where the quarterlight guide locates and get any welded up and dressed.
Logged

1969 Fanalone, Mazda RX-8, Fiat Multipla
angelorange
Megaposter
*
Posts: 324



WWW
« Reply #2 on: 11 August, 2011, 07:11:22 PM »

James at Alloy Racing Fabrications near Newark Notts is very good and sorted out my ally doors.  Pro Strip Nottingham removed all the paint and filler first!


* _0018911.jpg (84.05 KB, 480x640 - viewed 489 times.)
Logged

I'm entitled to my ignorance!
Pages: [1]   Go Up
  Print  
 
Jump to:  

Contact the Forum Administrator

LMC Forum copyright © 2007 - 2021 Lancia Motor Club Ltd

Powered by SMF 1.1.20 | SMF © 2006-2011, Simple Machines
Page created in 0.049 seconds with 20 queries.