Lancia Motor Club Forum Banner
19 August, 2019, 01:10:29 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
   Home   Help Search Calendar Register  
Pages: [1]   Go Down
Author Topic: Flaminia Touring Convertible help required  (Read 731 times)
0 Members and 1 Guest are viewing this topic.
Non-LMC Seller
Rebel Poster
Offline Offline

Posts: 827

« on: 30 May, 2011, 10:21:32 PM »

I have had an email from somebody in America who needs help with Flaminia convertible roof dimensions.  I have copied his question below.  Any help that can be provided will be gratefully accepted!

 I have had a stayfast top made for my car, to a pattern that seems slightly off. I was hoping to get some other Flaminia convertible owners to help with coming up with the best pattern possible. I would like to get the dimension from the front header bow over the top when erected, to each of the bows all the way to the last fixed mounting at the rear deck. The dimensions of the rear window and the distance of the window, from the rear fixed bow would be helpful. The number of tenax fasteners per side is also of interest as the pattern that I have, says that there are three per side in the quarter, while my car has only two. Does anyone have a factory picture of the top up, that could be scaled to see how the dimensions work out there?
 Many thanks for your help, please let me know if you have any questions.

Stuart Wilson 11175
1973 Fulvia Coupe 1.3
2000 Lybra SW 2.4JTd
2009 Delta 1.9 Twin Turbo
Pages: [1]   Go Up
Jump to:  

Contact the Forum Administrator

LMC Forum copyright © 2007 - 2018 Lancia Motor Club Ltd

Powered by SMF 1.1.20 | SMF © 2006-2011, Simple Machines