Lancia Motor Club Forum Banner
27 May, 2019, 06:32:54 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Search Calendar Register  
Pages: [1]   Go Down
  Print  
Author Topic: Flavia distributor installation- The missing washer  (Read 599 times)
0 Members and 1 Guest are viewing this topic.
phil-m
Lapsed
Senior Member
*****
Offline Offline

Posts: 173


« on: 14 March, 2011, 07:26:55 PM »

I am rebuilding and generally refurbishing my Sport, I have found a lot of play with the distributor and the slot in the link shaft between distributor and oil pump shaft is badly worn. I have measured everything up and found that there is only around 2mm of engagement between the dsitributor drive dog and link shaft slot. I think there should be a washer beneath the link shaft but cannot find any reference in the parts book. Can anyone shed any light on this?
Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  

Contact the Forum Administrator

LMC Forum copyright © 2007 - 2018 Lancia Motor Club Ltd

Powered by SMF 1.1.20 | SMF © 2006-2011, Simple Machines