Lancia Motor Club Forum Banner
09 April, 2020, 11:44:59 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Search Calendar Register  
Pages: [1]   Go Down
  Print  
Author Topic: Phew, now not Worrying!  (Read 776 times)
0 Members and 1 Guest are viewing this topic.
zagatoboy
Guest
« on: 26 January, 2011, 08:09:36 PM »

After removing the big ends, mains and pistons tonight all i've found is one broken oil ring on no 1 pot, all big ends worn and just a slight bit of wear on no 2 main, all the rest perfect so no need to remove the block and crank. There are no markings on the shells or pistons to show they have been replaced with oversize one's so all looks standard, nice and easy so far.
Anyone got any advice on the competition head gaskets over the standard, it has been recomended I use one even though the car will not be competing or have a modified engine as they are stronger.
Have taken pics and will try to post them again after reading Brians tips.
Logged
lancialulu
Press Officer
Permanent resident
*****
Offline Offline

Posts: 3728



« Reply #1 on: 27 January, 2011, 08:34:18 AM »

Paul

No need for comp gasget - just use a set of Hi tensile cap screws and touque to 24 ftlb.

Tim
Logged

Its not the winning but taking part! or is it taking apart?
1955 Aurelia B12
1967 Flavia Vignale iniezione
1967 Fulvia 1.3HFR
1972 Fulvia 1600HF
1972 Fulvia 1600HF
1972 1600 Fulvia Sport
1979 2500 Gamma Coupe
1988 Delta 1.6GTi
1998 Zeta
zagatoboy
Guest
« Reply #2 on: 27 January, 2011, 08:54:49 AM »

Tim
I've sent you some pic's.
Tony.
Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  

Contact the Forum Administrator

LMC Forum copyright © 2007 - 2018 Lancia Motor Club Ltd

Powered by SMF 1.1.20 | SMF © 2006-2011, Simple Machines